Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
Click the Internet Protocol (TCP/IP) and click the Properties button. 3. Select "Obtain an IP address automatically". Select "Obtain DNS server address automatically". Then click OK to complete the PC configuration. 4. Restart your computer. Router Configuration (for Internet Access) For Windows 2000 & XP users, your computer should obtain an IP Address automatically from the Wireless Router’s DHCP Server, after you’ve done the above steps and restarted your computer. 1 802.11g Wireless Router © Start your WEB browser. <&* Address |&j http:|i/l92.l68.l.254 In the Address box, enter the following: HTTP://192.168.1.254 The following screen will come up. The default user name is "admin" and the default password is left blank. Press the Setup Wizard to 10 configure the router. Click Next to let the Wizard configure your wireless router for Internet Access. Refer to the data from your ISP and the table below to select the type of Internet Access you have. Click Next to continue and follow the on-screen instructions. On the final screen of the Setup Wizard, click Finish to complete the configuration. Wait for a while and the system will run a test of your Internet Connection. Once the process is [14 J finished, the message will appear to ask you to press OK. Then click Close when you wish to exit the Wizard. Start your Web Browser on the PC again and try to connect to a well-known site (i.e., to check that an Internet connection can be established. Notes If the connection fails, check both your data of step 4~15 and the Cable/DSL modem. If you have any problems or are unable to setup using this Quick Install Guide, please refer to the complete User's Guide found on the CD. Notes r Type of Internet Access Connection Type Data Required Cable modem (TV-style cable) DSL/ADSL modem (phone-type cable) Telstra Bigpond Cable (Australia) SingTel RAS Other (e.g. Fixed Wireless) PPPoE L2TP PPPoE Usually, none. But some ISP may require a particular Hostname, Domain name, or MAC (physical) address. Login name and password. Login name and password, Server IP Address. Login name and password. PPTP Login name and password, Server IP Address. L2TP Login name and password, Server IP Address. Usually, none. None But some ISP may require a particular Hostname, Domain name, or MAC (physical) address. Please enter the Server IP Address, Login User Name and Login Password. Please enter the Login User Name, Login Password and RAS Plan (512K or 64K). Please choose one of the two ways for your Internet Connection: Dynamic IP Address assignment or Static IP Address assignment. M73-AP009-730 2...