Login:
Votes - 4, Average rating: 4 ( )

User manual Allied Telesis, model 86241-02

Manafacture: Allied Telesis
File size: 77.7 kb
File name: 3af6bac1-3217-1d74-f1ac-37dd1cdcab87.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


This metric is now only updated if a value for the parameter is specified. PCR: 02371 Module: FIREWALL Network affecting: No When the system time was set to a time that was before or significantly after the current time, Firewall sessions were prematurely deleted. This issue has been resolved. PCR: 02376 Module: PPP Network affecting: No When the PPP ONLINELIMIT was exceeded for PPP over TDM, the PPP link stayed open, allowing Link Quality Report (LQR) packets to be transmitted. This caused the ifOutOctets counter to increment. Now, if the ONLINELIMIT is exceeded, the link will close. PCR: 02378 Module: SWI Network affecting: No Entering 63 for the EPORT parameter in the ADD SWITCH L3FILTER command caused a fatal error. This parameter now accepts the values 63 and 64. PCR: 02395 Module: VRRP, TRG Network affecting: No The SHOW VRRP command now shows the number of trigger activations for the Upmaster and Downmaster triggers. PCR: 02397 Module: DVMRP Network affecting: No After a prune lifetime had expired, the interface was not joined back to the DVMRP multicast delivery tree. This issue has been resolved. PCR: 02398 Module: IPV6 Network affecting: No The following issues have been resolved: • It was possible to assign the same network on different IPV6 interfaces • The loopback address was being added to other interfaces • The tunnel configuration was not showing correctly in IPV6 configuration commands RIPv6 now sets the metric of routes for interfaces that are DOWN to 16, and immediately sends responses when the link status of VLAN interfaces changes. Patch 86241-02 for Software Release 2.4.1 C613-10340-00 REV B Patch Release Note PCR: 02399 Module: TRACE Network affecting: No The Trace utility has been modified. Previously, Trace sent a group of packets at once and waited for multiple responses in order to assess the minimum, maximum and average time to cover a certain "hop distance" towards the target host. Now Trace sends each packet in each group individually, and waits either for a response or a time-out before sending the next packet in the group. PCR: 02401 Module: IPV6 Network affecting: No Neighbour discovery and PIM6 caused a fatal error when IPv6 was not enabled, or when the IPv6 feature license was not present. This issue has been resolved. PCR: 02402 Module: SNMP, CORE, SHOW, Network affecting: No FILE SNMP MIB support has been enhanced for CPU utilisation and file statistics. MIB support has been added for Allied Telesyn contact details and fast buffers. PCR: 02403 Module: STP Network affecting: No A watchdog timeout occurred when the command ENABLE STP PORT was executed. This issue has been resolved. PCR: 02406 Module: IPV6 Network affecting: No A Router-Alert option has been added. Also, the SHOW IPV6 MLD INTERFACE command now works correctly. PCR: 02409 Module: IPG Network affecting: No A warning now appears when the DELETE IP INTERFACE command is executed before the DELETE DVMRP INTERFACE command. PCR: 02410 Module: VRRP Network affecting: No VRRP pre-empt mode was not working with advertisement updates of 1 second or more because this did not allow for interface start time on startup. Now a check is made to verify that interfaces are UP before timers are started. PCR: 02411 Module: IPV6 Network affecting: No The SHOW TCP command was not showing the listening status for IPv6. PCR: 02412 Module: IPV6 Network affecting: No An ISDN call was activated by IPv6 Router Advertisements over IPv6 tunnel interfaces. This issue has been resolved. PCR: 02415 Module: IPG Network affecting: No Packets with a RIP source address and next hop address that are not on the same subnet as the interface will now be processed. If the received next hop is not on the same subnet, it is treated as 0.0.0.0. Patch 86241-02 for Software Release 2.4.1 C613-10340-00 REV B Patch 86241-02 For Rapier Switches and AR800 Series Modular Switching Routers PCR: 02418 Module: IPV6 Network affecting: No ICMPv6 was returning an error for non-zero fragment offsets. This issue has been resolved. PCR: 02421 Module: PIM Network affecting: No The GUI was incorrectly accepting multiple entries for VLANs. This issue has been resolved. PCR: 02422 Module: GARP Network affecting: No The GUI was returning incorrect GARP counters. This issue has been resolved. PCR: 02428 Module: IPV6 Network affecting: No Link-local address behaviour was incorrect. Also, the PUBLISH parameter was not updated by the SET IPV6 INTERFACE command, or displayed in the SHOW IPV6 INTERFACE command. These issues have been resolved. PCR: 02450 Module: IPV6 Network affecting: No Large local packets were not being fragmented. Also, the More Fragment flag in the IPv6 fragment header was not being set correctly. These issues have been resolved. PCR: 02452 Module: IPv6 Network affecting: No Received Router Advertisements (RAs) were discarded when the interface was enabled to send RAs. This issue has been resolved. PCR: 02457 Module: IPV6 Network affecting: No The IPv6 prio...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category