Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Step 2:Step 3: Connect one end of the blue Plug in, then turn on your modem. Ethernet cable to your modem, and the other end to the Internet port Wait approximately two minutes until your modem turns on. on your router. If your modem has a battery backup, first remove and reinsert the battery before connecting your modem to power. Step 6:Step 4:Step 5: Modem or Cable Internet DSL (not included) N300 Wireless Router Open a browser. If the web page does not display, close and reopen the browser and enter in the address bar. The user name and password are on the product label on the router. Connect the power adapter to the router, plug the power adapter into and outlet, and press the Power On/Off button on the router. Wait until the Wireless LED turns solid green. Connect the router to your computer. Use another Ethernet cable to establish a wired connection as shown in this diagram. Optionally, connect wirelessly by using the preset wireless security settings located on the product label on the router. Preset Wireless Security This product has a unique Wi-Fi network name (SSID) and network key (password). The default SSID and password are uniquely generated for every device (like a serial number), to protect and maximize your wireless security. This information is on the product label on the router. NETGEAR recommends that you do not change the preset SSID or password. If you do change the settings, the information on the bottom of the product does not apply. Find the preset Wireless Settings on your router and record them here: Wi-Fi network name (SSID) _______________________________ Network key (password) _________________________________ If you change the preset wireless settings, record them here: Wireless network name (SSID) _______________________________ Network key (password) _____________________________________ If necessary to retrieve or update your password, type in a web browser and log in using the default user name (admin) and password (password). Select Wireless Settings to locate your wireless password. Connect Wireless Devices to Your Router Choose either the manual or Wi-Fi Protected Setup (WPS) method to add wireless computers, and other devices to your wireless network. Manual Method 1. Open the software utility that manages your wireless connections on the wireless device that you want to connect to your router (iPhone, laptop, computer, gaming device). This utility scans for all wireless networks in your area. 2. Look for the preset NETGEAR wireless network name (SSID), and select it. The preset Wi-Fi network name (SSID) is located on the product label on the router. Note: If you changed the name of your network during the setup process, look for that network name. 3. Enter the preset password (or your custom password if you changed it), and click Connect. 4. Repeat steps 1–3 to add other wireless devices. WPS Method If your wireless device supports WPS (Wi-Fi Protected Setup)—NETGEAR calls this method Push 'N' Connect—you might be prompted to press the WPS button on the router instead of entering a password. If this happens: 1. Press the WPS button on the router. 2. Within two minutes, press the WPS button on the client device, or follow the WPS instructions that came with your wireless device to complete the WPS process. The device will then be connected to your router. 3. Repeat this process to add other WPS wireless devices. Note: WPS does not support WEP security. If you try to connect a WEP client to your network using WPS, it does not work. Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit NETGEAR recommends that you use only the official NETGEAR support resources. You can get the user manual online at or through a link in the product’s user interface. For the current EU Declaration of Conformity, visit NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered NETGEAR, Inc. trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other 350 East Plumeria Drive countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved. San Jose, CA 95134 USA J...