Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
Network Equipment - XAV5602 (1.05 mb)
Network Equipment - XAV5602 (1.1 mb)
manual abstract
All rights reserved. Package Contents Products sold in some locations include a Resource CD. Ethernet cables (2) Powerline adapters (2) FranceGermany/EuropeSwitzerland Your Powerline adapter may look like one of these: Hardware Features Filtered AC socketPower LEDPowerline LEDEthernet LEDSecurity buttonFactory Reset button Compatible Powerline and HomePlug AV certified devices include the NETGEAR XAV101, XAV1501, XAV1004, XAV2001, XAV2501, XAV2602 XAVN2001, XAV5001, XAV5004, and XAV5501. For a complete list of HomePlug AV certified devices, go to LEDs The LEDS indicate the status of your Powerline adapters. • When you plug in the adapter, the Power LED lights up and turns green. • The adapter is not active when no Ethernet link has occurred for more than 10 minutes. The adapter enters power saving mode, and the Power LED turns amber. • The Ethernet LED lights up when you connect a powered-on Ethernet device to at least one Ethernet port. • The Powerline LED turns on when the adapter detects at least one other compatible Powerline device. The Pick A Plug diagnostic feature lets you pick the electrical outlet with the strongest throughput, indicated by the color displayed by the Powerline LED: - Green: Link rate > 80 Mbps (Best) - Amber: Link rate > 50 and < 80 Mbps (Better) - Red: Link rate < 50 Mbps (Good) Install Your Powerline Adapters You can plug a power strip into the filtered outlet, but do not plug your Powerline adapter into a power strip. The filtered AC socket removes some electrical noise. Plugging a nearby device into the filtered AC socket improves performance. Secure Your Powerline Network A Powerline network forms when at least two compatible Powerline devices communicate. After the Powerline network is up and running, you can use the Security buttons on the adapters to add encryption to your Powerline network. CAUTION: Do not press the Security button until each adapter has powered up and its Power LED is solid green. Pressing this button too soon can temporarily disable Powerline communication. If this occurs, use the Factory Reset button to return the Powerline adapter to its factory settings. To secure your Powerline network: 1. Make sure the Power LED is solid green. If it is amber, connect a device to one of the Ethernet ports so the adapter exits power saving mode. 2. On the first Powerline adapter, press its Security button for 2 seconds. The Power LED blinks green while you are setting up security. 3. Within 2 minutes, go to the next Powerline adapter and press its Security button for 2 seconds. After security is set, the Power LED turns solid green. The adapters can communicate over the network. The Powerline LEDs are blinking or solid. Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at Registration is required before you c...
Other models in this manual:Network Equipment - XAVB5602 (1.46 mb)