Votes - 3, Average rating: 4.3 ( )

Manafacture: 3Com File size: 291.91 kb File name: 90ce89b5-6d75-4e93-9009-d3709dcc8a2f.pdf Language of manual:

Follow the steps below to select an array to verify, rebuild or condition. 1. Select the Array to verify, rebuild or condition. 2. Click the radio button to Rebuild parity data, Verify parity data or perform Background drive member conditioning. If choosing Background drive member conditioning choose the priority between Low, Med or High. 3. Click OK to start the operation. Unlock drives Locked drives are drives that for one reason or another have stopped being recognized by the controller. Follow the steps below to select a drive to unlock or change the ID. 1. Select the drive with the icon. It will change to the icon. 2. Check the Confirm box and then click Unlocked Drive. LUN Map A LUN is a unique identifier used on a SCSI enables it to differentiate between up to eight separate devices. Use the LUN map to attach a unique identifier to a slice. Follow the steps below to map a LUN. 1. Select the Array to map. 2. Choose a LUN and from the drop down list select a series to map to. 3. Check the Confirm box and then click OK. 12 Snapshot The snapshot function mirrors the data from one slice onto another thereby backing up the data. Follow the steps below to take a snapshot: 1. Select Create Shot. 2. Select the shot, Source Slice and Destination slice. 3. Check the Confirm and then click OK. Note: The destination slice must be the same size or bigger than the source slice. Updating ACS-61000/61010 Firmware, BIOS and ROM 1. Download the latest firmware from 2. Start the RAIDGuard X client. 3. Add a controller. 4. Click Controller > Update > Update Firmware, Update Boot Code or Update BIOS & EFI. 5. Go to the location of the downloaded files and click Open. 13 FAQ 1. Q: RAIDGuard X server displays the “Find no RAID Card” window. A: Make sure that the controller card is connected inserted. 2. Q: Hard drives aren’t being displayed in the RAIDGuard X Client. A: Make sure that the Mini SAS cables are correctly installed and that the hard drives have power. 3. Q: The software has stopped working correctly. A: Restart the remote computer or server. If this doesn’t work, insert the Installation CD into the computer/servers CD-ROM drive, click Setup > Next > Repair > Install > Finish. 4. Q: Updating Firmware, Boot Code or Option ROM doesn’t work correctly. A: Do the following: 1) Check that the correct version is being installed eg, if, when updating the firmware the BIOS software is selected then the following message will be displayed “Command Failed”; 2) Don’t unzip the .gz file 3) Download the file again. 5. Q: E- Mail alerts aren’t working. A: Check that the correct details are inserted and that if a username and password are required they are inserted. See your network administrator for details. Contact Us Taiwan - Accusys, Inc. Address: 5F.,No.38, Taiyuan St., Jhubei City, Hsinchu County 302, Taiwan, R. O.C Tel : +886-3-560-30288, Fax : +886-3-560- 0299 e-mail : sales@accusys.com.tw America - Accusys U.S....

Download now

Please, enter two numbers from picture: