|
manual abstract
LED Indicators and Buttons LED Indicator Key Button Key A. Power F. Reset B. HDD Activity G. Power C. LAN 1 D. LAN 2 E. Overheat LED Indicator Color Condition Description Power Green On System On Off System Off HDD Amber Blinking HDD Activity Off No HDD Activity LAN 1 & LAN 2 Green On Link Connected Blinking LAN Activity Off Disconnected Overheat Red On System Overheated Off System Normal “H” Server Specifications Physical Specifications Specification ERH-100 Value ERH-200 Value Height 1.7” (43mm) 1.7” (43mm) Width 17.2” (438mm) 17.2” (438mm) Depth 26.8” (681mm) 26.8” (681mm) Front clearance 2 inches (76mm) 2 inches (76mm) Side clearance 1 inch (25mm) 1 inch (25mm) Rear clearance 3.6 inches (92mm) 3.6 inches (92mm) Weight 43.0 lbs (19.5 kg) 44.0 lbs (19.96 kg) Hardware Component Specifications Specification Value Operating temperature range 10° C ~ 35° C (50° F ~ 95° F) Storage temperature range -40° C ~ +60° C (-40° F ~ 158° F) Operating humidity range 8 ~ 90% non-condensing Storage humidity range 5 ~ 95% non-condensing Power supply 560W Hot-swap redundant AC power supply with PFC [ 24-pin, (8-pin = 12V) ] Rated AC input voltage 100 ~ 240V, 60-50Hz, 10-5 Amp per power supply module (two modules included in the chassis) Rated input frequency 50 ~ 60 Hz Rated input current 10A (115V) to 5A (230V) Rated output power 560W Maximum rated BTU N/A (see specs below) Nominal DC output: +3.3V 21.0A Nominal DC output: +5V 30.0A Nominal DC output: +12V 42.0A Nominal DC output: -12V 1.0A Nominal DC output: +5V standby 4.0A Regulatory (power supply) EN 60950/IEC 60950-Compliant UL Listed (USA) CUL Listed (Canada) TUV Certified (Germany) Internal Product Specifications Specification ERH-100 ERH-200 CPU 2x3.6GHz Xeon CPU 2x3.6GHz Xeon CPU Memory 4GB PC2700 / DDR-333 ECC SDRAM 4GB PC2700 / DDR-333 ECC SDRAM Hard drive capacity 4x250GB HDD 4x400GB HDD Connectivity 10/100/1000 10/100/1000 Front of Chassis: Control Panel Control panel buttons, icons, and LED indicators display on the right side of the front panel. The buttons let you perform a function on the unit, while an LED indicator corresponding to an icon alerts you to the status of that feature on the unit. The buttons and LED indicators for the depicted icons function as follows: UID (button) – When the UID button is pressed, a steady blue LED displays on both the front and rear of the chassis (see also Rear of Chassis). These indicators are used for easy location of the chassis in a large stack configu...
Other models in this manual:Network Equipment - ER3-200 (5K02-56) (3.8 mb)
Network Equipment - ER3-100 (5K02-55) (3.8 mb)
Network Equipment - ER3-100 (5K02-55) (3.8 mb)
Network Equipment - ER3-200 (5K02-56) (3.8 mb)