Votes - 4, Average rating: 3.8
(
)
)
|
manual abstract
No data will be lost if one of the drives fails. Mirror-Striping (RAID 0+1) Combined both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that come from Mirroring. RAID 1+S (Mirrored-Sparing) Can automatically replace the failed drive and rebuild the system when booting HDD failed. Important Note: • To do a RAID SET, you can press F4 or CTRL+S from the boot up screen. Read and follow the instruction inside the BIOS screen. • You can also install the SATA GUI utility Under Windows to monitor the RAID Set. It is under the Utility section of the driver disc. • Use the controller BIOS setup for creating RAID SET. SUPPORT Main: Addonics Technologies 2466 Kruse Drive San Jose CA 95131 Phone: 408 433-3899 Fax: 408 433-3898 Internet: Technical Support (8:30 am to 5:30 pm PST) Phone: 408 433-3855 Note: Specifications subject to change without notice. Emai|: Techinfo@addonics.com Copyright © 1998 - 2005 Addonics Technologies, Inc. All Rights Reserved....
Other models in this manual:Network Equipment - ADSA4R-E (158.47 kb)
Network Equipment - ADSA4R-E (158.47 kb)