Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
Now the new Bush Hog 320 “Original Plus” Series Rotary Cutters offer even more performance the first day on the job and for years to come. Performance You Can Count On BUSH HOG® Choose The “Original Plus" Bush Hog 300 “Original” Series Heavy-Duty Cutters helped make the Bush Hog name famous. Often copied, never equaled, they set the standard for heavy-duty cutters. The new and improved Bush Hog 320 “Original Plus” Series Heavy-Duty Cutters are called the “Original Plus” because they deliver all the performance and reliability of the “Original” Series plus more. Be sure you get authentic Bush Hog. Great Performances This Bush Hog Series 300 Heavy-Duty cutter is one of thousands of “Original” Bush Hogs that built the Bush Hog reputation for performance you can count on in tough conditions. This same model has maintained the rugged pasture at an 850-acre Texas cattle operation more than 22 years. Bush Hog® TOUGH Features Mean The New “Original Plus” Is Even Better Than The “Original” 10 Bush Hog TOUGH Features 1. TOUGH Sloped Deck. Improved sloped deck design sheds water and debris to increase deck life. 2. TOUGH Deck Reinforcements. Decks are reinforced with internal 7-gauge steel strongbacks that run the full length of the deck tying together the entire structure with the gearbox stand. 3. TOUGH Bush Hog Materials. 325, 326 and 327 decks are 7-gauge thick steel. Strongbacks are 7-gauge steel. 4. TOUGH Bush Hog Gearboxes. 325, 326 and 327 gearboxes are the same rugged gearboxes used on thousands of Bush Hog flex wing cutters. Rated at 190 HP they have the highest rating in their class. They are built to exacting Bush Hog speci cations and embossed with the Bush Hog brand. All models come with the TOUGH Bush Hog 5-year limited gearbox warranty. 5. TOUGH Sidebands. Sidebands are strong and deep. Formed of 1/4-inch thick steel, they are 12 1/2-inches deep. 6. TOUGH Blade Pans. Blade pans are 7-gauge steel formed in dished shape for extra strength. 7. TOUGH Bush Hog Blades. Built of heat treated alloy steel, blades are genuine Bush Hog and have been re ned based on years of Bush Hog experience in rugged, real world conditions. 8. TOUGH Tail Wheel Assembly. Heavy-duty tail wheel assemblies are standard on all models. 327 comes equipped with a heavy-duty axle and dual wheels for both lift and pull models. Both lift and pull models come with laminated tires that are built for rugged conditions. 9. TOUGH Heavy-Duty Gearbox Stand. An integral part of the cutter’s structure, the gearbox stand runs between the strongbacks. 10. TOUGH Category 5 Driveline. Rugged ASAE Cat 5 drivelines are standard on every 320 Series “Original Plus” cutter. The “Plus” In Bush Hog 320 “Original Plus” Series Rotary Cutters New sloped deck design + New internal strong backs + New deeper sidebands + New standard heavy-duty tail wheel + New standard heavy-duty Cat. 5 driveline + New ip-up shield for easy clutch service + Authentic Bush Hog® Gearbox Look for the Bush Hog® embossed on the gearbox. Only Bush Hog cutters are equipped with Bush Hog designed gearboxes. The new Bush Hog 320 “Original Plus” Series heavy-duty cutters feature the highest rated gearboxes in their class—190 hp. The Bush Hog® TOUGH 320 “Original Plus” Series PERFORMANCE FEATURES 7 5/16-inch blade to structure clearance Blade tip speeds to 13,996 fpm Cutting widths of 5, 6 and 7 ft Cutting heights of two to 12 inches 3 1/2-inch cutting capacity Standard front and rear deflectors TOUGH Sidebands Side bands are strong and deep. Formed of 1/4-inch thick steel, they are 12 1/2-inches deep. N \N Bush Hog* TOUGH 320 “Original Plus” Series Heavy-DutylRotary Cutters MODELS^^^H 325 326 327 Cutting Width 5 ft 6 ft HB 7 ft Cutting Capacity 31/2 inch diameter 31/2 inch diameter 31/2 inch diameter Cutting Height 2 - 12 inches 2 - 12 inches 2 - 12 inches Dimensions (width x length) 66 x 1071/2 inches 78 x 1181/2 inches 90 x 131 inches (Lift), 90 x 182 inches (Pull) Type Hitch HD 3 Point Category Cat. I & II standard and Quick Hitch HD 3 Point Category Cat. I & II standard and Quick Hitch HD 3 Point Category Cat. II & III standard Pull Model also available Deck Thickness 7 gauge 7 gauge 7 gauge Sidebands 1/4 x 121/2 inches 1/4 x 121/2 inches 1/4 x 121/2 inches Driveshaft ASAE Cat 5 ASAE Cat 5 ASAE Cat 5 Gearbox Heavy duty (190 HP) Heavy duty (190 HP) Heavy duty (190 HP) Tractor PTO Speed 540 RPM 540 RPM 540 RPM Driveline Protection Slip Clutch Standard Slip Clutch Standard Slip Clutch Standard Blade Holder(s) Round Round Round Blades 1/2 x 4 inch, heat treated 1/2 x 4 inch, heat treated 1/2 x 4 inch, heat treated Blade Tip Speed 13,572 FPM 13,996 FPM 11,875 FPM Tires Laminated Laminated Laminated, dual - Lift Large Laminated, dual - Pull Minimum Tractor HP 50 PTO 60 PTO 70 PTO Front and Rear Deflectors Front and rear deflectors standard, chains optional, all 3 models Approximate Weight 1185 lbs 1400 lbs 1950 lbs Lift, 2150 lbs Pul...