|
manual abstract
Replace any missing or illegible safety decals. Inspect for any damaged or worn parts and replace before next use. Store the Rough Cut Mower in a dry environment. 16 MAINTENANCE 1. Periodically check and maintain proper gear oil level. 2. Approximately every 8 hours, grease spindles (3), roller axle (1), wheel forks (4), wheel axles (4), PTO shaft universal joints (2), and PTO telescoping surface. NOTE: Use a high-temp/multi-purpose grease. 3. Before each use check to make sure all safety features are installed and working properly. 4. Keep blades sharp and balanced at all times. When replacing the blades, replace all blades and blade bolts at the same time. 5. Periodically check all nuts, bolts, and belt to insure they are tight and secure. Figure 14 Arrows indicate grease points. 17 A MAINTENANCE SAFETY • Good maintenance is your responsibility. Poor maintenance is an invitation to trouble. • Follow good shop practices. • Keep service area clean and dry. • Be sure electrical outlets and tools are properly grounded. • Use adequate light for the job at hand. • Make sure there is ample ventilation. Never operate the tractor engine in a closed building. The exhaust fumes may cause asphyxiation. • Before working on this machine, disengage the PTO, be certain all moving parts on attachments have come to a complete stop, shut off the engine, set the bakes, and remove the ignition keys before attempting to perform maintenance. • Never work under equipment unless it is blocked securely. • Always use personal protection devices such as eye, hand and hearing protectors when performing any service or maintenance. • Frequently check mower blades. They should be sharp, free of nicks and cracks and securely fastened in place. • Periodically tighten all bolts, nuts, screws and check that all cotter pins are properly installed to make certain unit is safe to operate. • When completing maintenance or service, make sure all safety guards and devices are installed before using the Rough Cut Mower. • After servicing, be sure all tools, parts and service equipment are removed from the Rough Cut Mower. • Do not allow debris, grease or oil to build up on any deck or platform. • Where replacement parts are necessary for periodic maintenance and servicing, factory replacement parts must be used to restore your equipment to original specifications. • The manufacturer and/or distributor will not be responsible for injuries or damages caused by use of unapproved parts and/or accessories. • A first aid kit should be kept readily accessible while performing maintenance on this equipment. A STORAGE SAFETY • Following use, or when unhooking the mower, disengage the PTO, stop the tractor, set the brakes, shut off the engine and remove the ignition keys. • Store the unit in an area away from human activity. • Do not park equipment where it can be exposed to direct contact with livestock for long periods of time. Damage to mower and/or livestock injury could result. • Make sure all parked machines are on a hard, level surface and that all safety devices engaged. 18 SAFETY DECAL LOCATIONS The safety decals and positions on the equipment are shown in the illustration below. Good safety requires that you familiarize yourself with the various safety decals, the type of warning and the area or specific function related to that area that requires your SAFETY AWARENESS. REMEMBER: IF the safety decals have been damaged, removed, become illegible or parts have been replaced without decals, new safety decals must be applied. 19 A DANGER A DANGER ROTATING DRIVELINE HAZARD KEEP AWAY To prevent serious injury or death from rotating driveline: • Keep all guards in place when operating. • Operate only at 540 RPM • Keep hands, feet, clothing and hair away from moving parts. • Do not operate without driveline securely attached at both ends. • Do not operate without driveline shields that op turn freely on driveline. ROTATING BLADES-KEEP AWAY To prevent serious injury or death when the engine is running and the blades are rotating: • Never allow riders, especially children, on tractor or mower. • Do not operate with bystanders in mowing area. • Do not operate with deflectors/guards removed. • Do not place hands or feet under deck. • Do not stand on or near implement at any time. • Do not stand between tractor and implements. • Operate only with tractor equipped ROPS and seatbelts. 1 ADANGER THROWN OBJECT HAZARD To prevent serious injury or death: • Do not operate unless all guards are installed and in good condition. • Stop blade rotation if bystanders come within several hundred feet. A WARNING TO PREVENT SERIOUS INJURY OR DEATH Keep hands and body out of hitch area when attaching mower to tractor. Keep body clear of crush point between tractor and mower. 3 20 A WARNING To prevent serious injury or death: Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las me...
Other models in this manual:Garden Tools - 180250 (8.23 mb)
Garden Tools - 180251 (8.23 mb)
Garden Tools - 180251 (8.23 mb)
Garden Tools - 180252 (8.23 mb)