Votes - 3, Average rating: 5
(
)
)
|
manual abstract
SAVE THESE INSTRUCTIONS Work Area Avoid accidental starting. Be sure switch is in the locked or off position before Keep your work area clean and well lit. inserting battery pack. Carrying tools with Cluttered benches and dark areas invite your finger on the switch or inserting the accidents. battery pack into a tool with the switch on Do not operate power tools in explosive invites accidents. atmospheres, such as in the presence of flammable liquids, gases, or dust. Power Remove adjusting keys or wrenchestools create sparks which may ignite the before turning the tool on. A wrench or a dust or fumes. key that is left attached to a rotating part of the tool may result in personal injury. Keep by-standers, children, and visitors away while operating a power tool. Do not overreach. Keep proper footingDistractions can cause you to lose control. and balance at all times. Proper footing and balance enable better control of the tool Electrical Safety in unexpected situations. Do not abuse the cord. Never use the cord to carry the tool. Keep cord away Use safety equipment. Always wear eye from heat, oil, sharp edges, or moving protection. Dust mask, non-skid safety parts. Replace damaged cords shoes, hard hat, or hearing protection must immediately. Damaged cords may create a be used for appropriate conditions. fire. A battery operated tool with integral Tool Use and Care batteries or a separate battery pack must Use clamps or other practical way to be recharged only with the specified secure and support the workpiece to a charger for the battery. A charger that may stable platform. Holding the work by hand be suitable for one type of battery may or against your body is unstable and may create a risk of fire when used with another lead to loss of control. battery. Do not force tool. Use the correct tool for Use battery operated tool only with your application. The correct tool will do specifically designated battery pack. Use the job better and safer at the rate for which of any other batteries may create a risk of it is designed. fire. Do not use tool if switch does not turn it on or off. A tool that cannot be controlled Personal Safety with the switch is dangerous and must be Stay alert, watch what you are doing, and repaired. use common sense when operating a Disconnect battery pack from tool or power tool. Do not use tool while tired or place the switch in the locked or off under the influence of drugs, alcohol, or position before making any adjustments, medication. A moment of inattention while changing accessories, or storing the tool. operating power tools may result in serious Such preventive safety measures reduce the personal injury. risk of starting the tool accidentally. Store idle tools out of reach of children Dress properly. Do not wear loose and other untrained persons. Tools are clothing or jewelry. Contain long hair. dangerous in the hands of untrained users. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, When battery pack is not in use, keep it or long hair can be caught in moving parts. away from other metal objects like: paper -2 BM 2610917139 6/02 7/10/02 10:50 AM Page 3 clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. Use only accessories that are recom mended by the manufacturer for your model. Accessories that may be suitable for one tool may create a risk of injury when used on another tool. Service Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury. Safety Rules for Cordless Planers Secure the material being planed. Never hold it in your hand or across legs. Small workpiece must be adequately secured so that the rotating planer blades will not pick it up during forward motion of the planer. Unstable support can cause the blades to bind causing loss of control and injury. Always start the plane before blade is in contact with the workpiece and allow the blade to come to full speed. Tool can vibrate or chatter if blade speed is too slow at beginning of cut and possibly kickback. Check the workpiece for nails, if there are nails, either remove or set them well below intended finished s...