Votes - 4, Average rating: 3.8 ( )

Manafacture: Sony File size: 2.33 mb File name: Language of manual:

You can also change the battery pack in AIBO with another pack that has been charged. Note Use only the supplied battery pack type ERA-301B1. 1 Press the pause button and wait until the back light turns off. Back light Note While AIBO is accessing the “Memory Stick,” the “Memory Stick” access indicator lights up red. During this time, the BATT Zlatch and Z button are deactivated and the battery pack and “Memory Stick” cannot be removed until the data-saving procedure has been completed. Do not try to remove the “Memory Stick” by force during this time. 44 2 Grasp AIBO securely by the body, turn it upside down, and remove its cover by pushing the mark towards AIBO’s tail. Notes • Lift AIBO by the body, and not by its extremities. Do not hold AIBO by its collar. Your finger may get caught between the collar and AIBO’s head or body. • AIBO’s surface is very smooth. Be careful not to drop AIBO while lifting it. • Do not touch the charging terminal with your hand. Doing so may soil the terminal and cause poor contact. 3 Flip the BATT Z latch towards AIBO’s tail to remove the battery pack. Playing with 45 BATT Z latch Notes Notes • When removing the battery pack, be sure to hold it securely so that it does not fall. • When the “Memory Stick” access indicator lights up, the battery pack is locked. Removing it forcibly at this time may damage AIBO. 4 Insert the charged battery pack in the direction of the arrow until the pack clicks into place, then replace the cover. Push here. 5 Place AIBO on the floor as shown below. Note Be sure to place AIBO on the floor as shown to the right. This will prevent AIBO from moving unexpectedly and being damaged when you press and release the pause button to start AIBO. 46 Additional information This chapter provides notes on usage, a troubleshooting guide, and other information concerning AIBO. Additional information This chapter provides notes on usage, a troubleshooting guide, and other information concerning AIBO. Notes on use To prevent AIBO and its accessories from being damaged, observe the following precautions. On handling AIBO • Do not use AIBO in places subject to vibrations, on an incline, or at a place where it might fall. • Do not press down hard on AIBO with your hand or elbow. • Do not drop or shake AIBO as this may damage AIBO or cause data saved to the “Memory Stick” to be lost. • Do not touch the charging terminal directly with your hand. Doing so may soil the terminal and cause poor contact. • Lift AIBO by the body, and not by its extremities, such as the head, ears, collar, tail or legs. Do not swing or twist AIBO. • Do not leave AIBO in very hot places, such as a car parked in the sun, as this may deform or damage it. • Do not allow foreign things, such as paper clips, to get into AIBO or its joints. • Do not use AIBO outdoors. If you do, moisture or other foreign matter may enter AIBO and cause damage. • Do not use AIBO on concrete or other hard surface as this may damage AIBO. • Do not allow AIBO to get wet. • Do not use force to interfere with any of AIBO’s movements. • Do not touch the lens of the color camera or distance sensor directly with your hand. • Do not apply stickers to the color camera or the distance sensor. • Do not point the color camera at the sun, whether AIBO is turned on or off, as this may damage the camera. • Do not oil AIBO’s joints or other movable parts. • Do not apply stickers to AIBO’s movable parts or insert anything between them as this may interfere with AIBO’s movement. • Do not disassemble or modify AIBO. • When transporting AIBO, put it in a cushioned box like the one it came in to protect its body, head, tail and legs from damage. • Do not use AIBO in a place subject to strong electromagnetic waves or X- rays. • Do not place a card with a magnetic strip or a magnetic recording medium close to the AC adapter conversion plug. The magnet inside the conversion plug may erase the data recorded on the magnetic medium. • The AIBO-ware applications designed for ERS-110/111 cannot be used with ERS-311/312. • ERS-311/312 may not operate with some AIBO-ware applications designed for ERS-210. And even if operable, there may be limits on some of the functions. Moisture condensation If AIBO is brought directly from a cold place to a warm place, moisture may condense on AIBO’s inside or outside surface, causing damage. If moisture condensation has occurred, wait for about one hour before operating AIBO. 49 Additional information On handling the AC adapter • Be sure to use only the supplied AC adapter to charge AIBO’s battery pack. Using any other adapter may cause damage to AIBO. • Do not connect the AC adapter to electronic transformers designed for use by travelers, as this may cause AIBO to heat up or become damaged. On handling the battery pack • Do not expose the battery pack to temperatures above 45 °C (113 °F), such as in a car parked in the sun. • Be careful not to let foreign matter like dust or sand get into the terminals. • If ...

Download now

Please, enter two numbers from picture: