Votes - 3, Average rating: 3.3
(
)
)
|
Other manuals for this model:
Receivers & Amplifiers - STR-DE595 (733.88 kb)
Receivers & Amplifiers - STR-DE595 (701.59 kb)
Receivers & Amplifiers - STR-DE595 (326.69 kb)
Receivers & Amplifiers - STR-DE595 (2.46 mb)
manual abstract
MULTI CH IN (STR-DE595 only) Press MULTI CH IN to enjoy the audio source connected to the MULTI CH IN jacks. You can adjust balance and level of all the speakers. When this function is on, the tone and surround effects are turned off. MULTI CHANNEL DECODING indicator (STR-DE595 only) This indicator lights up when the unit is decoding signals recorded in a multi channel format. MUTING Press MUTING on the remote to mute the sound. Press again to cancel the muting function. The muting function is also canceled when you turn the power on or turn the MASTER VOLUME to turn the volume up. continued Basic Operations 21GB Selecting the component (continued) PHONES Use to connect headphones. • When the headphones are connected, speaker output is automatically canceled and “SP” (STR-DE495 only) or “SP A” and “SP B” (STR-DE595 only) do not light up in the display. SPEAKERS (OFF/A/B/A+B) (STR-DE595 only) Press SPEAKERS (OFF/A/B/A+B) to output the sound from the speakers connected to the SPEAKERS FRONT terminals. Each time you press the button, the display will light up cyclically as follows: SP A t SP B t SP A and SP B t No display* To drive Select Speaker System A (Connected to the SPEAKERS FRONT A terminals) SP A (default setting) Speaker System B (Connected to the SPEAKERS FRONT B terminals) SP B Both Speaker System A and B (Connected to the SPEAKERS FRONT A and B terminals) SP A and SP B * If you do not want to drive Speaker System A and B, press SPEAKERS (OFF/A/B/A+B) until “SP A” and “SP B” do not light up in the display (no display). Changing the display DIMMER Press DIMMER repeatedly to adjust the brightness of the display (3 steps). However, when you press any button, the display becomes the brightest setting temporary. DISPLAY Each time you press DISPLAY, the display changes cyclically as follows: Index name of the component* t Selected component t Sound field applied to the program source When the tuner is selected Index name of the preset station* or program station name** t Frequency t Program type indication** t Radio text** t Current time** t Sound field applied to the band or the preset station * Index name appears only when you have assigned one to the component or preset station (page 34). Index name does not appear when only blank spaces have been entered, or it is the same as the input selector. ** During RDS reception only. (Models of area code CEL, CEK only. See page 32). 22GB Enjoying Surround Sound You can take advantage of surround sound simply by selecting one of the receiver’s pre- programmed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home. You can also customize the sound fields to obtain the sound you want by changing the surround parameter. To fully enjoy surround sound, you must register the number and location of your speakers. See “Multi channel surround setup” starting from p...
Other models in this manual:Receivers & Amplifiers - STR-DE495 (689.6 kb)