Votes - 5, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
3 Use the MULTI CONTROL..5 keys or TRIM..5 keys to select the ON or OFF setting. 1 NIGHT ON : Midnight mode ON. 2 NIGHT OFF : Midnight mode OFF. 4 Press the SOUND key to accept the setting. • The adjustment item is displayed for approximately 20 seconds. • Some Dolby Digital software may not be compatible with the Midnight mode. 5 Use the MULTI CONTROL./5 keys or TRIM./5 keys to select the “EXIT”. 6 Press the SOUND key to return to the input indication. Panorama mode (Pro Logic IIx Music mode and Pro Logic II Music mode only) When listening to music, you will be able to enjoy the “wraparound” sound effect when you adjust the panorama mode. 1 Press the SOUND key to enter the SOUND mode. 2 Use the MULTI CONTROL./5 keys or TRIM./5 keys to select the “PANORAMA” and then press the SOUND key again. DIGITAL DOLBY PLII L R 3 Use the MULTI CONTROL./5 keys or TRIM./5 keys to select PANORAMA ON or OFF. 1 ON : PANORAMA mode is ON. 2 OFF : PANORAMA mode is OFF. DIGITAL DOLBY PLII L R 4 Press the SOUND key to accept the setting. 5 Use the MULTI CONTROL./5 keys or TRIM./5 keys to select the “EXIT”. 6 Press the SOUND key to return to the input indication. Dimension mode (Pro Logic IIx Music mode and Pro Logic II Music mode only) When listening to music with certain recordings, you will also be able to achieve a suitable balance from all the speakers by adjusting the dimension mode. 1 Press the SOUND key to enter the SOUND mode. 2 Use the MULTI CONTROL./5 keys or TRIM./5 keys to select the “DIMENSION” and then press the SOUND key again. 3 Use the MULTI CONTROL./5 keys or TRIM./5 keys to adjust the soundfield towards the rear or the front. Soundfield is adjusted towards the front. DIGITAL DOLBY PLII L R Soundfield is in neutral position. DIGITAL DOLBY PLII L R Soundfield is adjusted towards the rear. DIGITAL DOLBY PLII L R 4 Press the SOUND key to accept the setting. 5 Use the MULTI CONTROL./5 keys or TRIM./5 keys to select the “EXIT”. 6 Press the SOUND key to return to the input indication. Center Width mode (Pro Logic IIx Music mode and Pro Logic II Music mode only) Center Width adjustment allows you to enjoy an enhanced sound when listening to music through center image from only center speaker, or left and right speakers or various combinations adjustments. 1 Press the SOUND key to enter the SOUND mode. 2 Use the MULTI CONTROL./5 keys or TRIM./5 keys to select the “CENTER WIDTH” and then press the SOUND key again. • When the center speaker is switched OFF, this mode will not be effective. 3 Use the MULTI CONTROL./5 keys or TRIM./5 keys to adjust the left-center-right output. Center image will be heard from center speaker only. DIGITAL DOLBY PLII L R Center image will be heard from left and right speakers only. DIGITAL DOLBY PLII L R • When in other positions, center image from center speaker, left and right speakers can be heard simultaneously with various combinations. 4 Press the SOUND key to accept the setting. 5 Use the MULTI CONTROL./5 keys or TRIM./5 keys to select the “EXIT”. 6 Press the SOUND key to return to the input indication. 27 EN Convenient functions Display dimmer adjustment The dimmer function lets you select the brightness of the amplifier's display. You might find this useful if you darken your room to watch movies or listen to music. 1 Press the SETUP key to enter the SETUP mode. 2 Use the MULTI CONTROL./5 keys or TRIM./5 keys to select the “DIMMER”. 3 Press the SETUP key again so that the dimmer setting indication appears. Select the brightness level you find most pleasing using MULTI CONTROL./5 keys or TRIM ./5 keys. 1 DIMMER H : Bright 2 DIMMER L : Dark 4 Press the SETUP key to return to the “DIMMER”. 5 Use the MULTI CONTROL./5 keys or TRIM./5 keys to select the “EXIT”. 6 Press the SETUP key to return to the input indication. Sleep timer (SLEEP) Set the number of minutes after which the unit to be turned OFF. Connect the related component under reference to “Connecting audio components”. Press the SLEEP key to select the time. • Each press increases the timer period by 10 minutes. The sleep timer can be setup to 90 minutes. 10 = 20 = 30 = .... = 80 = 90 = OFF = 10 = 20 = .... The sleep timer indicator will be lit. L R • Press the SLEEP key while the sleep timer is activated to check the remaining time. To cancel Turn the amplifier OFF or press the SLEEP key until the sleep time is cancelled. 96kHz LPCM playback The receiver is compatible with the 96kHz LPCM playback. To play a 96kHz DVD, set the listen mode to “STEREO”. • In FULL AUTO input mode, the listen mode will automatically be STEREO. • When in D.MANUAL input mode (listen mode is not STEREO), “FS 96kHz” will appear in the display and no sound can be heard from the speakers. Press the LISTEN MODE key (the listen mode changes to the STEREO mode) to output sound from the speakers. 28 EN Basic remote control operations for other KENWOOD DVD player DVD player operation keys How to operate the DVD player with the remote control 1. To carry out the...