Votes - 2, Average rating: 5 ( )

Manafacture: Kenwood File size: 1.64 mb File name: Language of manual:

The volume levels from each speaker should be the same. 1 Press the M MMMMM/? ????? keys or Joystick (2/3) to select TEST TONE. 2 Press the SETUP key for the following displays: 1 T.TONE AUTO 2 T.TONE MANUAL 3 The selection of AUTO/MANUAL TEST TONE is done by the MULTI CONTROL knob or Joystick (5/.). Press the SETUP key again to begin TEST TONE. Use the MULTI CONTROL knob or Joystick (5/.) to adjust the volume level of the test tone output from the speaker channel to be adjusted. For AUTO selection, the first test tone is heard from the front left speaker for 2.5 seconds. The next test tone is heard from the speakers in the following sequence for 2 seconds each. LEFT CNTR RIGHT SUBW SL SB SR The channel indication blinks while the test tone is being output. L SL S SB SR C R SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs CINEMA EQ. ACTIVE EQ. DSP MODE DTS. MATRIX DISCRETE DOLBY DIGITAL PRO LOGIC STEREO LOUDNESS NEO:6 CSIIA B CLIP AUTO DETECT THX AUTO RDS RTY MEMO STEREO TUNED Surround EX SW LFE • If you change the volume level settings for the speakers while listening to music, the settings referred to on this page are also changed. . • If the speaker setting selects are OFF, the speaker level settings are reset. For MANUAL selection, press the M MMMMM/? ????? keys or Joystick (2/3) each time to select the speaker channel. 4 Press the SETUP key again. • The test tone is turned off and return to the main setup displays. 5Input the distance to the speakers. 1 Press the M MMMMM/? ????? keys or Joystick (2/3) to select the SP DISTANCE on setup displays and press the SETUP key again. 2 Measure the distance from the listening position to each of the speakers. Jot down the distance to each of the speakers. Distance to Front left speaker (L) : ____ feet (meters) Distance to Center speaker (C) : ____ feet (meters) Distance to Front right speaker (R) : ____ feet (meters) Distance to Surround right (SR) : ____ feet (meters) Distance to Surround back (SB) : ____ feet (meters) Distance to Surround left (SL) : ____ feet (meters) Distance to Subwoofer (SW) : ____ feet (meters) 3 Use the M MMMMM/? ????? keys or Joystick (2/3) to select the speakers and the MULTI CONTROL knob or Joystick (5/.) to adjust the distance to the front speakers. The speaker indicator to be adjusted blinks. L SL S SB SR C R SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs CINEMA EQ. ACTIVE EQ. DSP MODE DTS. MATRIX DISCRETE DOLBY DIGITAL PRO LOGIC STEREO LOUDNESS NEO:6 CSIIA B CLIP AUTO DETECT THX AUTO RDS RTY MEMO STEREO TUNED Surround EX SW LFE Indication in feet Indication in meters • The allowable setting range is 1 to 30 feet (0.3 to 9.0 m), adjustable in 1 foot (0.3 m) increments. 4 Repeat steps 3 to input the distance for each of the speakers. Continued to next page 19 EN Preparing for surround sound 5 Press the SETUP key again to return to main setup displays. • The speakers you have selected should appear on the display. Confirm that all the speakers have been correctly selected. 6Select the display mode. 1 Press the M MMMMM/? ????? keys or Joystick (2/3) to select the DISP MODE. 2 Press the SETUP key for the following displays: 1 DISP SELECTOR : Displays the current input selector. 2 DISP LISTEN : Displays the current listen mode. 3 Use the MULTI CONTROL knob or Joystick (5/.) to select the display mode. L SL S SB SR C R SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs CINEMA EQ. ACTIVE EQ. DSP MODE DTS. MATRIX DISCRETE DOLBY DIGITAL PRO LOGIC STEREO LOUDNESS NEO:6 CSIIA B CLIP AUTO DETECT THX AUTO RDS RTY MEMO STEREO TUNED Surround EX SW LFE 4 Press the SETUP key again to accept the setting. 5 Use the M MMMMM key or Joystick (3) to select EXIT. L C R SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs CINEMA EQ. ACTIVE EQ. DSP MODE DTS. MATRIX DISCRETE DOLBY DIGITAL PRO LOGIC STEREO LOUDNESS NEO:6 CSIIA B CLIP AUTO DETECT THX AUTO RDS RTY MEMO STEREO TUNED Surround EX SW LFE 6Press the SETUP key to exit the SET UP mode. Input level adjustment (analog sources only) If the input level of an analog source signal is too high, the CLIP indicator will blink to indicate the source signal. Adjust the input level. L SL S SB SR C R SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs CINEM ACTIV DSP MA B CLIPAUTO DETECT SW LFE CLIPCLIP 1 Use the Input Selector keys to select the source of which the input level you want to adjust. • You can store a separate input level for each input source. 2 Press the SOUND and M MMMMM/? ????? keys or Joystick (2/3) repeatedly until the “INPUT” indication appears. 3 Use the MULTI CONTROL knob or Joystick (5/.) to adjust the input level. L SL S SB SR C R SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs CINEMA EQ. ACTIVE EQ. DSP MODE DTS. MATRIX DISCRETE DOLBY DIGITAL PRO LOGIC STEREO LOUDNESS NEO:6 CSIIA B CLIP AUTO DETECT THX AUTO RDS RTY MEMO STEREO TUNED Surround EX SW LFE • The adjustment mode is displayed for approximately 8 seconds. • The input level may be adjusted to any one of three settings: 0dB, -3dB, and -6dB...

Download now

Please, enter two numbers from picture: