Votes - , Average rating:
(
)
)
Manafacture: Kenwood
File size: 1.04 mb
File name:
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
manual abstract
This mode is designed for use with Dolby Surround program sources, but can also improve sound field unity for programs that are not Dolby Surround encoded. Dialog positioning and sound image definition, however, may not be as accurate when used with programs that are not Dolby Surround encoded. DVD 6-channel mode Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy multi-channel encoded DVD source material in all its splendor. Since the source signals are digital and each channel is input independently, the resulting sound quality, sense of spaciousness, and dynamic range are superb. Front speaker (L, R) Subwoofer (SW)* Center speaker Surround speakers (L, R) Front speaker (L, R) Subwoofer (SW) Center speaker Surround speakers (L, R) * LFE = Low Frequency Effects. This channel delivers separate non- directional bass signals to the subwoofer for more dynamic deep bass sound effects. Ambience effects Surround Play DOLBY DIGITAL can be used when playing DVD or LD software bearing the mark and DOLBY DIGITAL format digital broadcasts (etc.). DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playing video, DVD, or LD software bearing the mark. Operations Preparations • Turn ON related components. • Complete "Preparing for surround sound" (speaker settings). ^ • Use the INPUT SELECTOR to select the component you wish to playback with surround sound. • Use the INPUT MODE key to select the input mode (analog or digital) for the source you wish to play back. 7 1Start playing the video software. 2Press the LISTEN MODE key to select the listening mode. The listening mode settings are stored separately for each input. If the input mode is set to digital auto ("AUTO SOUND" lights), the receiver selects the optimal listening mode automatically based on the type of input signal and the speaker settings. Each press of the LISTEN MODE key switches the setting as listed below. The listening mode settings are different depending on the type of input signal. When the DOLBY DIGITAL signal is input: (The DOLBY DIGITAL, PROLOGIC, or 3 STEREO indicator lights up.) 1 DOLBY DIGITAL: DOLBY DIGITAL surround 2 PRO LOGIC: PRO LOGIC surround 3 3 STEREO: 3-STEREO surround 4 STEREO: Normal stereo playback When you select DOLBY DIGITAL When the analog signal or the digital signal except for theDOLBY DIGITAL signal is input: 1 PRO LOGIC: PRO LOGIC surround (The PRO LOGIC indicator lights up.) 2 3 STEREO: 3-STEREO surround (The 3 STEREO indicator lights up.) 3 STEREO: Normal stereo playback • If a Dolby Digital signal having more channels than the maximum number of playback channels available using the receiver's current setting is input, the DOWN MIX indicator on the front panel lights up and downmixing is performed to match the number of avaliable channels. 3Adjust the volume. Notes • Depending on the type of the signal or speaker setting, some listening modes cannot be selected. • When playback is started, the sound may be cut or interrupted before the input source is confirmed as Dolby Digital. • To enjoy Dolby Digital surround (as well as all the other listening modes) from a single component, be sure to use a Dolby Digital compatible source component. Connect the Dolby Digital compatible source component's Dolby Digital format digital audio signal to one of the DIGITAL INPUT jacks on the back of the receiver. Connect the normal audio signal correctly to the respective component's AUDIO jacks. 890! DVD 6-channel playback Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy surround sound playback. When you try to play a disc other than Dolby Digital such as CD, no sound is produced or, noise may be heard. To avoid this situation, make sure that you connect the component to the receiver’s DVD/6ch INPUT jacks through a surround processor which can decode the surround signal you want to listen to. Connecting a DVD player which can decode the surround signal itself is also acceptable. INPUT SELECTORINPUT MODE DVD Preparations • Connect your DVD player to the DVD/6ch jacks of the receiver. • Turn on all other components that will be used. • Complete "Preparing for surround sound". ^ 1Select "DVD/6ch" as the input source. • Use the INPUT SELECTOR knob to select DVD/6ch mode. 2Select "6ch INPT" by pressing the INPUT MODE key. 3Start playback of the DVD software. 4Adjust the volume. • It is not possible individually to adjust the volume level or sound quality (SET UP, SOUND) of the separate channels when the receiver is in the DVD/6ch mode. Adjust the volume with the controls of the DVD player. For the powered subwoofer, you can adjust the volume of the subwoofer using the subwoofer’s own volume control. Ambience effects Convenient functions MULTI CONTROL DIMMER SOUND SOUND MULTI CONTROL Adjusting the sound You can make further adjustments to the sound while listening to playback in the surround mode. 1 Press the SOUND key to select the item you ...