Votes - 4, Average rating: 3.3
(
)
)
|
manual abstract
DOWN VOL. UPMEMORY S.DIRECT SOUND BALANCE . 1 . P.CALL4 BAND AUTO A/B +100 POWER 1 2 # 3 4 5 6 7 0 ! $ % @ 9 . . MUTE 1 Numeric keys (1~0, +10) If CD or MD is selected as the input source, these keys function as numeric keys. If tuner is selected as the input source, these keys are used to call up station presets. 2 Component operation keys Use these keys to operate other components with system control connections to the receiver. TUNING (1 A) keys # If tuner is selected as the input source, these keys function as tuning keys. If CD or MD is selected as the input source, these keys function as search keys. P.CALL (4 .) keys % If tuner is selected as the input source, these keys function as P.CALL keys. If CD or MD is selected as the input source, these keys function as skip keys. 2 key If tape is selected as the input source, this key functions as the play key for side B of the cassette (the side facing away from the front of the deck). BAND (6) key # If tuner is selected as the input source, this key functions as the band selector key. If CD is selected as the input source, this key functions as the play/pause key. If MD is selected as the input source, this key functions as the play key. DISC SKIP, A/B, +100 key If CD is selected as the input source, this key functions as the multi-CD player disc skip key. If TAPE is selected as the input source, this key is used to switch between the two decks (A and B) of a double cassette deck. If MD is selected as the input source, this key function as numeric key. AUTO(7) key # If tuner is selected as the input source, this key functions as the AUTO key. If CD or MD is selected as the input source, this key functions as the stop key. 3 VOLUME UP, DOWN keys 0 4 MEMORY key % Use to store radio stations in the preset memory. 5 SOUND key ! Use to adjust the sound quality. 6 BASS BOOST key ! Use to select the maximum adjustment setting for the low frequency range. 7 DIMMER key $ Use to adjust the brightness of the display. 8 Input selector keys 0 Use to select the receiver’s input source. 9 RDS operation keys # Use to receive RDS broadcasts. 0 POWER ( )key 0 Use to switch the power ON/STANDBY when the POWER is turned ON. ! S.DIRECT key ! @ MUTE key ! Use to temporarily mute the sound. # MULTI CONTROL keys Used to make a variety of settings. $ BALANCE key ! Use to adjust the sound balance. % TAPE2/ MONITOR key 0@ Names and functions of parts KRF-A4020 (En/E2T) Preparing the remote control Loading the batteries 1 Remove the cover. 2 Insert the batteries. 3 Close the cover. Preparations • Insert two AA-size (R06) batteries as indicated by the polarity markings. Operation When the “STANDBY” indicator is lit, the power turns ON when you press the POWER ( ) key on the remote control. When the power comes ON, press the key you want to operate. Remote sensor Operating range Model: RC-R0708 Infrared ray system • When pressing more than one remote control key succes- (Approx.) 30° 6 m 30° sively, press the keys securely by leaving an interval of 1 second or more between keys. Notes: 1. The supplied batteries may have shorter lives than ordinary batteries due to use during operation checks. 2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones. 3. Placing the remote sensor in direct sunlight, or in direct light from a high frequency fluorescent lamp may cause a malfunction. In such a case, change the location of the system installation to prevent malfunction. Normal playback KRF-A4020 (En/E2T) 10 INPUT SELECTOR MULTI CONTROL MULTI CONTROL BASS BOOST BASS BOOST SOUND BALANCE SOUND SPEAKERS A B MUTE POWER POWER ON/STANDBY AUTO MUTE SOURCE DIRECT S. DIRECT BALANCE VOLUME UP, DOWN VOLUME CONTROL Selecting the speaker system Press the SPEAKERS A or B key to select the speaker system to be used. A ON B ON A+B ON A+B OFF : Sound from the speakers connected to the SPEAKERS A terminals on the rear panel. : Sound from the speakers connected to the SPEAKERS B terminals on the rear panel. : Sound from both the speakers connected to the SPEAKERS A and B terminals on the rear panel. : No sound from the speakers. Use this setting when listening with headphones. The indicator for the speakers you want to use should be lit. SP. A B Operations Preparing for playback Some preparatory steps are needed before starting playback. Turning on the receiver 1 Turn on the POWER key to ON. 2 Turn on the power to this receiver by pressing ON/ STANDBY ( ) key. Selecting MD/TAPE 1 (Main unit only) Select the source name corresponding to the component connected to the MD/TAPE1 jacks. The initial factory setting is “TAPE 1”. To change the source name associated with the MD/TAPE1 jacks to “MD”, follow the steps below: 1 Use the INPUT SELECTOR knob to select “TAPE 1”. 2 Hold down the AUTO key for more than 2 seconds. • The source indication changes to “MD”. • To return to the original indication, repeat the above procedure. Listening to a source component 1Use the inpu...