Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
Flashes. MODE START PTY SEEK 2 Select the desired program type. TUNING 3 Begin searching all preset RDS stations. PTY SEEK MODE START AUTO PS PTY RT CT PTY HOLD Flashes. * The “PTY HOLD” indicator lights up on the display. • If a station which broadcasts a program of the program type is found, the unit stops at the station and the program type lights up. If the station has PS data, after that, it turns into the PS mode. • If the called station is not the desired one, press the PTY SEEK START button once more. The unit begins searching for another station which broadcasts a program of the same program type. • If no station is found, “NOTHING” appears and then returns to frequency display. If the station has PS data, after that, it turns into the PS mode. * If the PTY SEEK START button is pressed once more during searching, this mode is canceled and turns into the frequency display. If the station has PS data, after that, it turns into the PS mode. To cancel this function If the PTY SEEK MODE button is pressed once more, the PTY SEEK mode is canceled and turns into the frequency display. If the station has PS data, after that, it turns into the PS mode. Making this unit call a program of your desired program type automatically when its broadcast starts English This function uses the EON (Enhanced Other Networks) data service on the RDS station network. By only selecting a desired program type (NEWS, INFO, AFFAIRS or SPORT), this unit automatically searches all preset RDS stations for a station that broadcasts a program of that program type in the background, and, if found, receives a program when its broadcast starts in place of the program now being received. * This function can be used only when an RDS station that employs the EON-PTY data service is received. (When such a station is received, the “EON” indicator lights up on the display.) NATURAL SOUND AM/FM STEREO TUNER TX–592RDS RDS MODE/FREQ PTY SEEK EON A/B/C/D/E MEMORY EDIT FM/AM TUNING MODE MODE START MAN'L/AUTO FM AUTO/MAN'L MONO 1 5 2 6 3 7 4 8 PRESET STATIONS TUNING PTY SELECTOR STANDBY/ON 2 1 Make sure that the “EON” indicator is illuminated on the display. * If the “EON” indicator is not illuminated on the display, receive an (or another) RDS station so that the “EON” indicator lights up on the display. 2 Select a desired program type, NEWS, INFO, AFFAIRS or SPORT. Press once or more. The search is performed among all preset RDS stations in the background. If a program is found, the program is automatically received when its broadcast starts. Flashes. Lights up. EON PS PTY RT CT EON PS PTY RT CT EON NEWS PS PTY RT CT EON NEWS 3 When the broadcast of the called program ends, the previously received program (or another program on the same station) is recalled. PS PTY RT CT EON To cancel this function Press the EON button once or more, so that no program type name lights up on the display. TROUBLESHOOTING If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM CAUSE REMEDY FMCrackling sounds from time to time (especially in weak signal areas). Ignition noise from passing vehicles. The FM antenna should be put up as high as possible, away from the road, and a coaxial cable used. Noise from thermostats or other electrical equipment. Attach a noise suppressor to the equipment causing the noise. FM stereo reception is noisy. Because of the characteristics of FM stereo broadcasts, this is limited to cases where the transmitter is far away or the antenna input is poor. Check the antenna connections. Try using a high quality directional FM antenna. Set the TUNING MODE button to the manual tuning mode. The ST indicator flickers and reception is noisy. Insufficient antenna input. Use an antenna appropriate for the reception condition in your area. Not tuned correctly. Tune again. There is distortion and clear reception cannot be obtained even with a good FM antenna. There is multipath interference. Adjust antenna placement to eliminate multi- path interference. No stereo effect even with a stereo broadcast. The TUNING MODE button is set to the manual tuning mode. Set the button so that the “AUTO” indicator lights up on the display. A desired station cannot be tuned in with Automatic tuning. The station is too weak. Use the manual tuning mode. Use a high quality directional FM antenna. Previously preset stations can no longer be tuned in. The tuner has been unplugged for a long period. Repeat the presetting procedure. AMInsufficient sensitivity. Weak signal or loose antenna connections. Tighten the AM loop antenna connections and rotate it for best reception. A desired station cannot be tuned in with Automatic tuning. Use the manual tuning mode. There are continuous crackling and hissing...