Votes - 4, Average rating: 4.3
(
)
)
|
Photos and specs Sony STR-DA5700ES |
Other manuals for this model:
manual abstract
Subwoofer Level Lets you set the level of the subwoofer to 0 dB or +10 dB when PCM signals are input via an HDMI connection. You can set the level for each input to which an HDMI input jack is assigned independently. x 0 dB x Auto Automatically sets the level to 0 dB or +10 dB, depending on the audio stream. x +10 dB Subwoofer Low Pass Filter Lets you turn the low-pass filter for the subwoofer output on or off. The low-pass filter works when PCM signals are input via an HDMI connection. You can set the function for each input to which an HDMI input jack is assigned independently. Turn the function on if you connect a subwoofer without the crossover frequency function. x Off Does not activate the low-pass filter. x On Always activates the low-pass filter with a cutoff frequency of 120 Hz. Audio Out Lets you set the HDMI audio signals output from the playback equipment connected to the receiver via an HDMI connection. 104GB x TV+AMP x TV+AMP Notes • The sound quality of the playback equipment depends on the TV’s sound quality, such as the number of channels, and the sampling frequency, etc. If the TV has stereo speakers, the sound output from the receiver is also in stereo as that of the TV, even if you play multi-channel source. • When you connect the receiver to a video equipment (projector, etc.), sound may not be output from the receiver. In this case, select “AMP.” • When you do not select an HDMI input jack as an audio input in “Audio Input Assign” in the Input Settings menu, sound is not output from the TV. x AMP The HDMI audio signals from the playback equipment is only output to speakers connected to the receiver. The multi-channel sound can be played back as it is. Note When “Control for HDMI” is set to “On,” “Audio Out” may be changed automatically. H.A.T.S. Lets you turn the H.A.T.S. (High quality digital Audio Transmission System) function on or off. When the H.A.T.S. function is turned on, the sound quality is enhanced because there is no jitter (timing gaps when reading signals) when transmitting digital audio signals. x Off x On Notes • It takes some time to output the sound after a playback operation is performed on the connected equipment (e.g., pressing the PLAY button, pressing the STOP button, pressing the PAUSE button) due to limitations of the H.A.T.S. system. The time lag depends on the sound source. • The H.A.T.S. function of this receiver works when a Sony SCD-XA5400ES is connected to the receiver. • While the H.A.T.S. function is working, sound is not output from the front high speakers. Stream information about the H.A.T.S. function available Audio signal input Sampling frequency Linear PCM 2ch 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4kHz, 192kHz Linear PCM Multi 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4kHz, 192kHz DSD 2.8224 MHz Control for HDMI Lets you turn the function which controls equipment connected to the HDMI jack using an HDMI cable on or off. x Off x On Pass Through Lets you output HDMI signals to the TV even when the receiver is in standby mode. For details, see “Outputting the HDMI signals even when the receiver is in standby mode (Pass Through)” (page 79). x Off x On Adjusting Settings 105GB Video Direct Video Direct x Off The input signals from the HDMI IN jack are output through a video processor. x On The input signals from the HDMI IN jack are output directly. Input Settings You can adjust the settings for the connections of the receiver and other equipment. Input Edit Lets you set the following items for each input. x Watch/Listen Sets whether an input is displayed on the Watch menu or the Listen menu. – Watch: Displays an input to the Watch menu. – Listen: Displays an input to the Listen menu. – Watch/Listen: Displays an input to both the Watch and Listen menus. – Hidden: Does not display an input to both the Watch and Listen menus. When you select an input, you can skip an input which is set to “Hidden.” x Icon Sets the icon displayed on the Watch/Listen menu. x Name Sets the name displayed on the Watch/Listen menu. Note You cannot select an input which is set to “Hidden,” or “HIDDEN” in “INPUT SKIP ?” in “INPUT SETTINGS” (page 116) without using the GUI, even if you use INPUT SELECTOR on the receiver. Audio Input Assign Lets you set the audio input jack(s) assigned to each input. For details, see “Using other video/audio input jacks” (page 80). x HDMI HDMI IN 1/2/3/4/5/6, none x Digital OPT IN 1/2/3/4, COAX IN 1/2, none x Analog Factory default setting Video Input Assign Lets you set the video input jack(s) assigned to each input. For details, see “Using other video/audio input jacks” (page 80). x HDMI HDMI IN 1/2/3/4/5/6, none x Component COMPONENT IN 1/2, none x Analog Factory default setting 106GB Network Settings Network Settings Internet Settings Lets you check or change the network settings. You can change the settings for the following items either manually or automatically. –IP Address – DNS – Proxy Server Connect the receiver to the network beforehan...