Votes - 2, Average rating: 4
(
)
)
|
manual abstract
Place seat bracket on top of hump mount brackets and replace seat mount bolts. Slide console up to dash and secure to trak mount with 1/4” hardware. Unit is ready to accept equipment control heads. HUMP BRACKET MOUNTED CONSOLE HARDWARE: QTY: DESCRIPTION: PART #: 4 Z-20 x /” Carriage bolt GSM32000 4 1/4” Flat Nylon Retaining Washer GSM31322 4 Z-20 Hex Flange Serrated Nut GSM30023 INSTALLATION: 1. Remove front seat mounting bolts near transmission hump 2. Place Carriage bolts into slots from underneath to top of hump mount bracket and place nylon retaining washer on bolt on top side to hold in place. 3. Place hump mount bracket over transmission hump and onto seat mount studs, place seat bracket on top of hump mount bracket and replace seat mount bolts. 4. Place console on hump bracket and secure with Z” serrated nut. 5. Unit is ready to accept Equipment control heads. Consolidator’ • Kwik-Raze* • Collins Dynamics’ • Kwik-Kit” PrisonerTransports • K-9Transports 75 Jacksonville Rd • P.O. Box 2099 • Warminster, PA 18974 • 800.524.9900 / 215.957.0720(P) • 215.957.0729 (F) C-AS-INST-11-06...
Other models in this manual:Receivers & Amplifiers - Angled Series Consoles C-AS-1025 (211.71 kb)
Receivers & Amplifiers - Angled Series Consoles C-AS-1060 (211.71 kb)
Receivers & Amplifiers - Angled Series Consoles C-AS-1525 (211.71 kb)
Receivers & Amplifiers - Angled Series Consoles C-AS-1725 (211.71 kb)