Votes - 5, Average rating: 4.4
(
)
)
|
manual abstract
The clock must be set for this feature to operate. (Refer to the Set-Up Menu to set time.) NOTE: This feature will be disabled when Auto Power On is activated. 1. Press ACTION button on the TV or Remote (some models). 2. Press A / ▼ and ^ ^ buttons to highlight the Timer Icon. 3. Press ACTION button to display the Timer Control Menu. NOTE: Timer Control menu will not display channel option for model CT- 2786Y. 4. Press ▼ button to highlight ON (time). 5. Press ^ ^ button repeatedly to set hours (set AM/PM accordingly). 6. Press ▼ button to highlight the minutes position. 7. Press ^ ^ button repeatedly to set minutes. 8. Press ▼ button to highlight OFF (time). 9. Repeat steps 5 through 7 for setting OFF (time). 10. Press ▼ button to highlight CHANNEL. 11. Press ^ ^ button or use the Remote Control Keypad (some models) to enter the channel number desired when the set turns “ON”. 12. Press ▼ button to highlight SET. 13. Press ^ button to select: • NO - not activated ° ONE DAY - activated • DAILY - activated 14. Press ACTION button twice to exit menus. NOTE: To deactivate Program Timer select NO in step 13. Helpful Hints: ’ ' * * • If the Program Timer “ON” functions while the set is operating, the set will automatically tune to the channel designated in the Timer Program. -18- Set-Up Features Set Time Clock (when set) will display on screen at initial ‘Turn On”, after a channel change and when pressing the RECALL button. The time must be set first in order to operate the Program ON/OFF Timer. NOTE: This feature will be disabled when Auto Power On is activated. Press ACTION button on the TV or Remote (some models). Press A / ▼ and ^ ^ buttons to highlight the Set-Up Icon. Press ACTION button to display the Set-Up Menu. 1. 2. 3. ISET-ÜR] MODE IHESPANOllFRANCAtS NOTE: For model CT-2786Y, the ANT, AUTO PROG, and MANUAL PROG selections will not be displayed in the Set-Up menus. Press ^ ^ button to set hours (set AM/PM accordingly). Press ▼ button to select minutes position. Press ^ ^ button repeatedly to set minutes. Press ACTION button twice to exit menus. 4. 5. Antenna (Ant) CT-2786VY only The proper Input mode must be selected for the type of signal at the antenna input. • TV mode is used when the Monitor is not connected to a cable TV system, for example when using a VHF/UHF antenna (channels 02 - 69). • Cable mode is used when the Monitor is connected to a Cable TV system and you are not using a cable company converter box (channels 01 - 125). 1. Press ACTION button on the TV or Remote (some models). 2. Press A/Yand« /► buttons to highlight the Set-Up Icon. 3. Press ACTION button to display the Set-Up Menu. iSEfëÜfS \m ESeANOilERANGAlS 4. Press V button to highlight ANT. 5. Press ^ ^ button to select TV or CABLE. 6. Press ACTION button twice to exit menus. Auto Prog (CT-2786VY only) This feature allows you to place all channels with a video signal into Channel Scan Memory. 1. Press ACTION button on the TV or Remote (some models). 2. Press A / ▼ and ^ ^ buttons to highlight the Set-Up Icon. 3. Press ACTION button to display the Set-Up Menu. 4. Press ▼ button to highlight AUTO PROG. 5. Press ^ ^ button to start Auto Programming. Channels will automatically advance until all channels have been scanned. 6. Press ACTION button twice after completion of Auto Programming to exit menus. NOTE: Channel numbers with signal present will turn blue which indicates stored in Channel Scan Memory. -19- Set-Up Features (cont.) Manual Prog (ct-2786Vy only) This feature allows you to select which channels are placed into Channel Scan Memory. 1. Press ACTION button on the TV or Remote (some models). 2. Press A / ▼ and M ^ buttons to highlight the Set-Up Icon. 3. Press ACTION button to display the Set-Up Menu. ¡SETsTIME §ANitp:_..... !aUT<$PROG MANUAL PROG *AUTO POWER ON ESPANOL ¡¡OFF IFRANCAISII 4. Press ▼ button to highlight MANUAL PROG. 5. Press M ^ button to display the Manual Programming Menu. ■ ATr^iYO ENTER¿CHANNEL-iNUMBER ►ITOADDGH^NNEII :4:T0 DELETE ¿CHANNEL- 6. Use the A / ▼ button or the Remote Keypad (some models)“0 through 9” buttons to select channels. 7. Press ^ button to add channel(s) to memory (Blue). Press M button to delete channels from memory (Yellow). 8. Repeat steps 6 and 7 to continue adding or deleting channels. 9. Press ACTION button twice to exit menus. Auto Power On This feature allows the user to power up the TV at the same time as the cable box (or other components). Of course, the TV must be plugged into the cable box. NOTE: When this feature is activated (on), Timer features will be disabled. Icon changes to Exit. 1. Press ACTION button on the TV or Remote (some models). 2. Press A / ▼ and4^ / ^ buttons to highlight the Set-Up Icon. 3. Press ACTION button to display the Set-Up Menu. set^ur; ri 4. Press ▼ button to highlight AUTO POWER ON. 5. Press M ^ button to select SET or OFF. 6. Press ACTION button ...