Votes - 4, Average rating: 3.5 ( )

Manafacture: Kathrein File size: 1.8 mb File name: Language of manual:

To access them, just press .. Use the arrow buttons to find the menu you want and select the following functions: Hard Disk Recorder • Lock Yes/No Parental control On/Off Playback is locked (protected by password) • Clear skip points No function during recording • Split take No function during recording The functions can be set with the arrow buttons. Split Take You can split a recording at any point during playback. Move the cursor bar to the “Split take” option using the .. buttons and confirm with .. The recording take is split, and now appears twice in the hard disk programme guide with different running times. Playback and Recording To switch to an already recorded programme without stopping the current recording, you can use the .. buttons to place the coloured bar on one of the previous recordings in the “HD Program Guide” and select it for full-screen playback by pressing .. The “REC” flag to the right of the programme title indicates that this programme is being recorded. Hard Disk Recorder While you are watching a pre-recorded programme, the previously selected programme continues to be recorded. For capacity reasons, only 400 single recordings are possible on the 80 GB hard disk. When started by EPG, the recording time automatically stops five minutes after the end of the programme titles (see page 44). Without EPG, the recording time is automatically pre- programmed at two hours. Changes can be made using the .. or by entering numbers. If the hard disk is full, recording stops. Fast Forward/Fast Rewind (no picture) To forward or rewind the receiver rapidly without viewing the picture in playback mode: • Press . during playback of the recorded programme to access the control console and press the pause button II. • You can then press . (rewind) or . (fast forward) to rewind or fast-forward with no picture (the longer you hold down the button the faster the speed becomes). • Use the . and . arrow buttons to jump to the end or back to the start of the recording. Playback. To play a recording from the hard disk, press the . button. The “HD Program Guide” appears with a list of the recordings saved to the hard disk. If there are no recordings stored on the hard disk, a message is shown telling you so. With the .. buttons, you can select a currently running or previous recording and start the playback by pressing .. The recorder plays the recording you selected. “h***” appears on the LED display. Hard Disk Recorder The asterisks stand for the recording number. At the end of the playback, the receiver switches back to the “HD programme guide”. If you are recording at the time, the display remains “REC 1” or “REC 2”. Drive functions can be accessed with the following remote control buttons: = Visible/time-controlled rewind . = Visible/time-controlled fast forward . = Normal playback . = Freeze-frame; with or freeze-frame or ... picture-by-picture (only if control console is not displayed; if control console is displayed advances 10 seconds at a time!)/unlock with . = Hard disk programme guide is displayed; playback is . stopped; with . playback is resumed = 4-speed slow-motion during playback .. (red button) The symbol for the current function is displayed in the bottom left-hand corner of the screen. During playback, you can get all necessary information by pressing the . button. At the top left of the bar the programme being played back is indicated. To the right of it, a progress bar indicates how much of it has been played back so far. The symbol for the current selected playback function appears at the left, and next to it the current playback time and total duration are displayed. Important! The 4-speed slow-motion function cannot be selected when the control console is displayed on the screen during playback. Hard Disk Recorder Setting Index Marks (Skip Points) During playback and with the control console displayed (opened with the . or . button), index marks (skip points) can be set and can then be displayed above the time bar by pressing the . button. This function is used to skip specific parts of a recording (from the beginning marker to the next end marker) during the next playback, so as to cut adverts out of films for example. Note: You cannot set index marks as long as the small control console popup (opened with the . button) is on display. Also, you cannot set index marks at the end of a recording! Further control console functions can be displayed during playback. To access them, first press the . or . button (to open the control console), then the . button. If there is a block of adverts at the end of your recording which you want to remove, you must use the “Split take” function. The split portions of the recording will be saved to the hard disk separately. You can then delete the second part of the split (the block of adverts) from the hard disk in the same way as you would delete any other recording. To do this, place the time bar at the start of the last block of adverts and execu...

Download now

Please, enter two numbers from picture: