Votes - 4, Average rating: 3.8
(
)
)
|
manual abstract
6 Connecting SWT Speakers.............................................................................................. 6 Connecting Non-SWT Speakers...................................................................................... 6 Connecting To a Tango Audio Controller................................................................. 6 Connecting SWT Keypads......................................................................................... 6 Wiring Diagram - Single Amplifier............................................................................ 7 Wiring Diagram - Expanded Configuration............................................................... 8 Tango Amplifiers i Table of Contents Tango Amplifiers Tango Amplifiers Tango Amplifiers Overview Where more than one pair of speakers is required in Tango Distributed Audio zones, the Tango Amplifier (FIG. 1) provides the extra power needed to drive up to 4 additional speaker pairs per unit for a total of 12 additional speaker pairs or 24 channels per zone. Use Tango Amplifiers in backyards, large rooms or other zones where additional speakers are needed. FIG. 1 DAS-TAMP4/8-SIG Tango Amplifier (front panel) The DAS-TAMP4-SIG Tango 4-Channel Amplifier is a 4-channel amp that supports an additional 2 speaker pairs per unit. The DAS-TAMP8-SIG Tango 8-Channel Amplifier is an 8-channel amp that supports an additional 4 speaker pairs per unit. DAS-TAMP4-SIG (To speaker pair (SWT)) (To speaker pair (SWT)) DAS-TAMP8-SIG (To speaker pair (SWT)) (To speaker pair (SWT)) (To speaker pair (SWT)) (To speaker pair (SWT)) FIG. 2 Tango Amplifiers (rear panels) Features • High-quality sound - delivers 60 watts of high-quality sound per channel. • Expandable - stack up to three Tango Amplifiers units per zone to allow up to 12 speaker pairs (24 channels) in a single zone. • Easy installation - SWT (Speaker Wire Technology) makes installation simple using four conductor speaker wire. • Integrates with Tango Series, Delta Series and Mi Series controllers, as well as the W, C, C-DT and EL Series speakers. Tango Amplifiers J Tango Amplifiers Product Specifications Tango Amplifiers - Product Specifications Models Available: DAS-TAMP4-SIG 4-Channel Amplifier: • US version (120V) - FG1103-21 • Int'l version (240V) - FG1103-23 DAS-TAMP8-SIG 8-Channel Amplifier: • US version (120V) - FG1103-22 • Int'l version (240V) - FG1103-24 Dimensions (HWD): • 3 1/16” x 17” x 13 1/2” (7.68cm x 43.18cm x 33.52cm) • RU: 2 Weight: 25.75 lbs (11.68 kg) Power: • Average usage: 250 W • Maximum: 750 W • High current Torroidal power supply Stereo Output: • Dual mono amplifier stage design • 60 W per channel (1 KHz continuous .006%@ 8 Ohms THD+N) • Each Tango amplifier is capable of providing 480 watts @ 8 Ohms Configuration: • Modular Design - configurable in single pairs up to 4 stereo pairs (8 channels). • Stackable (up to 3 Tango Amplifiers) Control Options: • Metreau Audio Keypads (DAS-MET-6SRC, DAS-MET-NUM) • C-Series speakers using SWT Front Panel Components: Light Bar • Blue light bar indicates power status. Status LED • Blue LED lights when active Rear Panel Components: Power Switch & Receptacle The master power switch will remain in the ON position normally. Output 1-4: SWT connectors provide direct connection to speakers. From Controller: SWT input port (connects to an Audio Controller) To Keypad: SWT output port (connects to Matrix keypad or interface) This connector can also be used to connect to a another Tango Amplifier, to allow for expansion (up to three Tango Amplifiers units per zone). See the Wiring Diagram - Expanded Configuration section on page 8 for details. Included Accessories: Power Cord Other AMX Equipment: DAS-MRMK Mi Series Rack Mount Kit (FG1101-60) Audio Switching When no audio is present, the Tango amplifier will go into Standby mode and mute the speakers after about 5 seconds. When audio is sensed at the input, the device will un-mute the speakers and the volume may be controlled by the keypad or remote. The switch time between muting and un-muting is approximately 200 milliseconds. L2 Tango Amplifiers Wiring and Connections Wiring and Connections Overview - Speaker Wire Technology (SWT) Speaker Wire Technology (SWT) allows both data and audio signals to travel over the same four conductor wire. This remarkable technology removes the need for control wire since the control and audio signals are shared on the same wire. The reliability and simplicity of this system has been proven for years. AMX Matrix Audio is the only company that offers a “retrofit solution”, one which allows the replacement of volume controls with AMX Matrix Audio keypads and Controllers, giving full control over the sources. Additionally, the versatility of SWT also allows AMX Matrix Audio products to be connected where the control wire has been run separately from the speaker cable. Front and Rear Panel Components FIG. 1 prov...
Other models in this manual:Receivers & Amplifiers - Tango Amplifiers DAS-TAMP4-SIG (480.45 kb)