Login:
Votes - 3, Average rating: 4 ( )

User manual Altinex, model HDTV/DVD/Component Video to RGBHV Transcoder TR6102HD

Manafacture: Altinex
File size: 1.76 mb
File name: e58308ec-3a82-4f82-b327-5cc79e2df6d4.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


Output offers standard RGBHV or RGBS format. MECHANICAL TR6102HD Width (inches) 8.50in (216mm) Height (inches) 1.75in (44mm) Depth (inches) 4.93in (125mm) Weight (pounds) 2.0lbs (0.91kg) Ship Weight (pounds) 4.0lbs (1.82kg) Material 0.1” Al Finish Gray Front/Back Panels Lexan Overlay T° Operating 10°C-35°C T° Maximum 50°C Humidity 90% non-condensing MTBF (calculations) 40,000hrs Table 2. TR6102HD Mechanical ELECTRICAL TR6102HD Input Video Signal (Y) Nominal Level 0V to 0.7Vp-p (Y) Maximum Level 1.2Vp-p w/ no offset (Pr, Pb) Nominal Level -0.35V to -0.35Vp-p (Pr, Pb) Maximum Level -0.5V to +0.5Vp-p Impedance 75 Ohms Output Video Signals Level 0.7V nominal Impedance 75 Ohms Output Sync Signals Composite, Horizontal, & Vertical TTL (+/-) Impedance 22 Ohms Frequency Compatibility Horizontal 15.75-45 kHz Vertical 60Hz Video Bandwidth 30 MHz @ -3dB Coupling DC Cross-talk -40dB @ 10 MHz Power Internal Power Supply 230/110 V Power Consumption 10 watts max. Table 3. TR6102HD Electrical Table 1. TR6102HD General 3 APPLICATION DIAGRAM 4APPLICATION DIAGRAM 4 TRANSCODERS INSTALLING YOUR TRANSCODER 5 OPERATION 6 Step 1. Connect the video output of the W-VHS VCR or HDTV camera to the video input of the TR6102HD using 3-BNC coaxial cables. Step 2. Connect the display device to one of the 3 output ports of the TR6102HD using the proper cable. If display device accepts 5BNC input, use the 5-BNC output of the unit and a 5-BNC to 5-BNC cable. If the display device has a 15-pin HD connector, use a VGA cable, and connect to one of the two VGA outputs Step 3. Connect the power cord and turn the unit on. The LED lights will turn on, indicating that the unit is operational. Step 4. Make sure that the large screen projector or monitor’s picture is acceptable. Make the necessary adjustments to the W-VHS VCR. NOTE: The converted image may exhibit streaking on the very bottom of the image. Use the blanking controls on the projector to blank the two bottom lines. CONGRATULATIONS! YOU ARE ALL DONE. If you experience any problems, please call 1-800-258-4623 or 1-714-990-2300 for international calls. The TR6102HD will operate successfully as long as cables are attached properly and other technical specifications are followed. 6.1 HDTV INPUT The input of the TR6102HD consists of 3 BNC connectors and is directly compatible with the output of a W-VHS VCR and a HDTV camera. CONNECTOR CONNECTOR TYPE DESCRIPTION 1 BNC Ey 2 BNC EpB 3 BNC EpR Table 4. HDTV input configuration 6.2 RGB OUTPUT Three buffered RGB outputs are provided on the TR6102HD. The main output is RGBSHV on 6BNC connectors. Output No.1 and No.2 are 15-pin HD connectors with video signal output pin-outs compatible with VGA pin-outs. CONNECTOR CONNECTOR TYPE DESCRIPTION 1 BNC RED 2 BNC GREEN 3 BNC BLUE 4 BNC COMPOSITE SYNC 4 TRANSCODERS ACESSORIES 7 CONNECTOR CONNECTOR TYPE DESCRIPTION 5 BNC HORIZONTAL SYNC 6 BNC VERTICAL SYNC Table 5. Main output RGBSHV output configuration 6.3 POWER The power module is configurable to 110 or 220 volts. To reconfigure the unit, squeeze together the two prongs of the fuse module of the power module and pull it out from its socket. Remove the fuse box and install it to display the desired voltage in the voltage window. Place the fuse box back in its socket. PIN OUTPUT SIGNALS 1 RED 2 GREEN 3 BLUE 4 Not used 5 Not used 6 Ground 7 Ground 8 Ground 9 Not used 10 Not used 11 Not used 12 Not used 13 HORIZONTAL SYNC 14 VERTICAL SYNC 15 Not used Table 6. RGBHV output on 15-pin connector 6.4 CABLE REQUIREMENTS Any 3-BNC, 4-BNC, or 5-BNC coaxial cable can be used as an input cable. The output cable type depends on the display device input port and the output port used on the TR6102HD. For example, a VGA monitor can be directly connected to Output 1 and 2. A multi-sync monitor with BNC input can be connected directly to the main output. Other combinations may require cables with a 5-BNC or 15-pin HD (VGA) connector on one end and a connector compatible with the display device on the other end. Model No. Description 15-PIN VGA TO 5 BNC MS8102CA 15-pin HD Male to 5 BNC-6ft MS8104CA 15-pin HD Male to 5 BNC-15 ft MS8106CA 15-pin HD Male to 5 BNC Female-6ft MS8112CA 15-pin HD female to 5 BNC - 6ft MS8114CA 15-pin HD female to 5 BNC - 15ft STANDARD 15-PIN VGA (M) to (M) Coaxial Cable CB3703MR 3 feet, 15-pin HD (M) to 15-pin HD (M) CB3706MR 6 feet,15-pin HD (M) to 15-pin HD (M) CB3715MR 15 feet,15-pin HD (M) to 15-pin HD (M) CB3725MR 25 feet,15-pin HD (M) to 15-pin HD (M) CB3750MR 50 feet,15-pin HD (M) to 15-pin HD (M) CB3775MR 75 feet,15-pin HD (M) to 15-pin HD (M) CB37100MR 100 ft,15-pin HD (M) to 15-pin HD (M) 4 BNC TO 4 BNC COAXIAL CABLE CB4100MR Bulk cable 4 coaxes (500 ft minimum) CB4106MR 6 feet, 4 BNC to 4 BNC coaxial cable CB4112MR 12 feet, 4 BNC to 4 BNC coaxial cable CB4125MR 25 feet, 4 BNC to 4 BNC coaxial cable CB4150MR 50 feet, 4 BNC to 4 BNC coaxial cable CB4175MR 75 feet, 4 BNC to 4 BNC coaxial cable CB41100MR 100 feet, 4 BNC to 4 BNC coaxial cable 5 ...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category