32 Bottom View........................................................... 32 LCD Display........................................................... 32 Getting Start.............................................................. 32 Replacing Lamp..................................................... 32 Connect to Power Source...................................... 3 3Clock.......................................................................... 53 Manually Set Clock.................................
5 BAR339DP_M_EN_R6.indd 5 6/18/08 12:31:03 PM ENMANUALLY SET CLOCK MANUALLY SET CLOCK To set the clock manually, disable the clock signal reception first. 1. Press and hold CLOCK. 2. Press / to change the settings. 3. Press CLOCK to confirm. The settings order is: time zone, 12/24 hr format, hour, minute, year, calendar mode (month – day / day – month), month, day and language. BAR339DP: Time zone offset sets the clock +/- 23 hours from the received clock signal time. NOTE If you enter + 1 in th
NOTE Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing. CLOCK CLOCK RECEPTION This product is designed to synchronize its clock automatically with a clock signal received from provided remote sensor. To enable / disable signal reception: Press and hold to enable or to disable signal reception. NOTE Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal. Clock signal reception indicator: STRON
Main unit batteries low / no battery 12. Projector: Project time / outdoor temperature and weather forecast 13. Indicate indoor / outdoor sensor reception status 14. Outdoor Temperature (Current / Max / Min) 15. Clock 16. Time Zone Offset 17. Calendar with weekday / seconds 18. ALARM: View alarm status / set alarm 19. MEM: Toggle between current / maximum / minimum temperature display; clear records 1. SNOOZE: Activate snooze alarm; turn on backlight; flip projected image 180. 2. Weather forecas
2 Front (and Back) View ........................................... 3 Installing the Batteries ........................................... 4 Safety and Care Instructions .................................. 5 Safety Precautions ................................................. 5 Caring for your Product .......................................... 5 Getting Started ......................................................... 5 Unpacking the Product .......................................... 5 Batteries
1 About this guide .................................................... 2 Product overview ................................................... 3 Getting started ...................................................... 6 Batteries ............................................................ 6 Switch between modes ..................................... 6 Change settings ................................................ 6 Clock .................................................................... 6 Alar
Press SELECT to switch between options. CLOCK This product can automatically synchronize the date and time with official time-keeping organizations in Frankfurt, Germany (PS-S01) or Rugby, England (PS-S01U). When the unit is within 1500 km (932 miles) of a RF signal, the reception icon will blink during reception. 6 EN RECEPTION Reception takes 2 – 10 minutes to complete. Once complete, the icon will stop blinking. Strong signal Weak signal No signal NOTE For best results, place the unit away fr
Avoid dropping the unit or placing it in a location where the antenna or AC power adapter will be stepped on. WARNINGS This product is designed to give you years of service if handled properly. Observe the following guidelines: • Never immerse the unit in water. This can cause electrical shock and damage the unit. • Do not subject the main unit to extreme force, shock, or fluctuations in temperature or humidity. • Do not tamper with the internal components. • Do not mix new and old batteries or
Outdoor measurements are collected by the remote unit. Temperature is given at the top; humidity is below. VIEW MIN / MAX / CURRENT MEASUREMENTS Press SELECT 3 times until the Temperature and Humidity Areas flash. Press UP or DOWN to scan the readings. CLEAR MIN / MAX RECORDS While viewing Min/Max records, press and hold UP or DOWN for 2 seconds until a beep sounds. This clears the previous measurements from the memory. SELECT REMOTE UNIT CHANNEL While in the Temperature / Humidity Mode, press C