Votes - 3, Average rating: 4
(
)
)
|
manual abstract
The date is displayed in month-date format next to the day of the week and moon phase icon in the Calendar Window. MANUAL SETTINGS If desired, the time, date and other available parameters can be programmed manually. It is necessary to set your Time Zone manually. TIME ZONE • Enter the US Time Zone programming mode by pressing and holding the UP (+) button for 3 seconds. • Keep holding UP (+) button until the desired time zone (Pacific, Mountain, Central or Eastern) is highlighted on the unit’s display map in the Time Window • Release the UP (+) button and the desired Time Zone will be selected CLOCK • Press and hold MODE button for 3 seconds until the year digits in the Calendar Window will flash • Press UP (+) or DOWN (-) adjusting a correct year • Press MODE to confirm and move to the next parameter – the month digit will flash • Press UP (+) or DOWN (-) adjusting the current month and then press MODE to confirm – the date digit will flash 12 • Press UP (+) or DOWN (-) adjusting the date and then press MODE to confirm – the hour digit will flash in the Time Window • Press UP (+) or DOWN (-) adjusting the hour and then press MODE to confirm – the minutes will flash • Press UP (+) or DOWN (-) adjusting the minutes and then press MODE to confirm – the temperature in the Temperature and Alarm Window will flash • Press UP (+) or DOWN (-) selecting the temperature unit in Fahrenheit or Celsius • Press MODE for the last time to confirm after the last parameter is set DAY OF THE WEEK LANGUAGE • Press and hold DOWN (-) button for 3 seconds to enter into the day of the week language programming mode: the default language abbreviation will appear (example – EN) • Continue holding DOWN (-) button until the desired day of the week language abbreviation is displayed • Release the DOWN (-) button and the day of the week will be displayed in selected language ALARMS The Color Changing Projection Clock has two time alarms. If any of the alarms is activated, it will sound at the set time and the alarm icon will flash. 13 PROGRAMMING THE TIMES OF THE ALARMS • Press MODE button to view the ALARM 1 or ALARM 2 modes. If the ALARM 1 is selected, the default time “6:00” with the ALARM 1 label will be displayed. If the ALARM 2 is selected, the default time”8:00”with the ALARM 1 label will be displayed • Press and hold or two seconds -the hour digit will flash • Enter the hour using DOWN (-) or UP (+) buttons • Press button -the minute digits will flash • Enter the minutes using DOWN (-) or UP (+) buttons • Press button again. The minute digits for snooze interval will flash • Enter the desired interval in minutes (from 1 to 59) using DOWN (-) or UP (+) buttons • Press button confirming the ALARM 1 time is set. • Use the same procedure for setting the time for ALARM 2 ACTIVATING OR DEACTIVATING THE ALARMS • At any time press or to activate or deactivate applicable alarm • When ALARM 1 and ALARM 2 are disabled, an applicable icon or disappears from the unit’s display. SNOOZE When any alarm sounds, press the SNOOZE/LIGHT button to temporarily stop the alarm. After the SNOOZE / LIGHT button are depressed, the alarm sound will resume in the programmed snooze period. If the alarm is not disabled after that, it will sound for four more minutes and then will stop by itself. 14 PROJECTION The Color Changing Projection Clock is capable ofprojecting the information for a limited time, as well as continuously. LIMITED TIME PROJECTION • Press SNOOZE/LIGHT button once to project the current time image for five seconds. • Press FLIP button to rotate projected image 180° clockwise • Press and hold FLIP button for 2 seconds again and the projected image will rotate between the time and indoor temperature information every 5 seconds PM PM CONTINUOUS TIME AND TEMPERATURE PROJECTION • Connect AC/DC adapter provided to the AC adapter input to project the time and/or temperature image continuously. with continuous color change and a projection and backlight in only one selected color. The default option is continuous color change. BACKLIGHT There are two different options of using a backlight in the Color Changing Projection Clock: • When the AC adapter is not connected, the backlight feature is activated in blue color for 5 seconds when the 15 • Slide the CONTINUE PROJECTION switch to the arrow direction shown on the unit’s side: the current time will be projected on the wall or the ceiling continuously. PROJECTING IMAGES IN DEFFERENT COLORS Your Color Changing Projection Clock designed with an ability of changing the projected image and the display backlight color. NOTE: This feature can be activated only if an AC adapter is connected (Continues Time and/or Temperature Projection mode). There are two options available – projection and backlight 16 LIGHT/SNOOZE button is pressed. • When the AC adapter is connected and CONTINUE PROJECTION switch is in ON position, the backlight color will change along with the color of the projected image PRECAUTIONS...