Votes - 2, Average rating: 4 ( )

Manafacture: Lathem File size: 3.9 mb File name: Language of manual:

(For jumper/shunt selection, see page 9, "Consecutive / Duplicate Count.") OPTIONAL FEATURES REPEAT/ADVANCE SWITCH Overrides automatic numbering advance to allow repeating the same number if desired, or advances to a higher number. (See page 8 for operating instructions.) INSCRIPTION PLATES The die plates may be permanently fixed or removable. They can have up to 3 lines of 20 characters per line, or carry facsimile signatures. (Note: Removable die plates must be removed before opening top frame and reinstalled after closing top frame.) 5 -LT Series Operations Manual 24-HOUR FORMAT The digital display models (LTTC and LTTNC) can display 12-hour (standard), or 24-hour, also known as the Continental (0-23 hour), format, when specified at time of order. The time wheels can print 24-hour format for an added charge. FIXED PAPER GUIDE Provides a fixed edge on the side of the time stamp to help the user make more accurate registrations. ADJUSTABLE PAPER GUIDE Enables the user to position registrations more accurately on various paper sizes. Adjustments are made quickly and easily with the slide mechanism. MANUAL REGISTRATION BUTTON [Standard on LTN and LTTN(C)] Enables the user to position the document and manually activate the imprint. GETTING STARTED Getting started with the LT Series is easy. There are only a couple of fundamental decisions that must be made. 1. Plug the unit into the wall outlet. 2. Place the clock on top of the anti-skid rubber pad 3. Set the type section. 4. Set the digital clock (optional feature). INSTALLATION The LT Series time stamp installs easily on any tabletop or flat surface. Determine whether you have a 110/120 VAC or 220 VAC unit, then plug it into any appropriate AC wall outlet. (Note: Avoid outlets with On/Off switches. These outlets may be accidentally turned off, causing an interruption of the timing action.) REGISTRATION When forms are fully inserted into the stamp, an automatic trigger causes registration. If the optional manual registration button is installed, insert a form to the desired position by aligning the desired registration position with the print locators (Figure 1, Number 1) on the side of the case. When registration buNumber 2). the tton form on the is faligned, ront of the press unit the manual (Figure 1, Figure 1 6 -LT Series Operations Manual SETTING THE TYPE WHEELS As noted in the earlier sections LT SERIES MODELS and OPTIONAL FEATURES, the LT Series Models are available with a variety of date, time, and number wheels. You may set the applicable type wheels according to the following directions. 1. Disconnect the power source. 2. Remove the top cover by inserting the key in the back of the unit, turning the key clockwise, and pulling the cover up and forward. 3. Remove the frame locking pin (Figure 2, Number 1). Lift the top frame (Figure 2, Number 2) to access time and date type wheels (Figure 2, Number 3) and number type wheels, if applicable. 4. Depress the time type setting lever (Figure 2, Number 4). Usi...

Download now

Please, enter two numbers from picture: