Votes - 4, Average rating: 4.3 ( )

Manafacture: Oregon Scientific File size: 311.32 kb File name: Language of manual:

- To disable the alarm, press [ ON/OFF ], the alarm will stop and it is not active, it will not activate the following day. HOW TO USE THE SNOOZE The Lite Touch feature enables you to activate the 8 minute snooze by gently rocking the RF clock backwards on its stand with the touch of your fingers. [see FIG.D] LITE TOUCH HiGloTM BACKLIGHT Using the Lite Touch feature, the display will activate for five seconds so you can see the display in the dark. The light then automatically turns off. [see FIG.D] HOW TO RESET THE UNIT The RESET button allows you to return all settings to its factory values, which are, 1-1 (1st of January) for date, 00:00 for time and 0:00 for alarm, which will be deactivated. The button is required only when the unit is not operating in a favorable way, such as in the rare case of a malfunction. THE TABLE STAND To use the cover as a stand, rotate the hinges cover over the back of the clock. SPECIFICATION - 24-h display : hh : mm : ss (DCF version) - 12-h display : hh : mm : ss (MSF version) - Power : Two (2) UM4 or “AAA” size batteries - Size : 87 X 67 X 18 mm ( H x W x D ) - Weight : 66 g (without battery) NOTE ON COMPLIANCE R&TTE Compliance Note This device complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directive, if used for its intended use and that the following standard(s) has been applied: Electromagnetic compatibility (Article 3.1.b of the R&TTE Directive) Applied standards ETS 300 683 : 1997 EN 300 220-1 : 1997 (if applicable) Efficient use of the radio frequency spectrum (Article 3.2 of the R&TTE Directive) Applied standards EN300 220 –1 : 1997 (if applicable) CAUTION — The content of this manual is subject to change without further notice. — Due to printing limitation, the displays shown in this manual may differ from the actual display. — The contents of this manual may not be reproduced without the permission of the manufacturer. To disable the RF function: Press and hold the [ ] button for 3-seconds. The radio-reception signal will disappear. To enable the RF funciton: Press [ ] and hold for 3-seconds. The radio-reception signal will appear and a signal search will automatically commence. Interference Reception can be affected by a number of factors. For best reception, place the device away from metal objects and electrical appliances. Note: Interference from sources such as TV sets can affect the signal. If, after batteries have been inserted for ten minutes, the signal is not received, then set the time manually (see section: How To Set The Calendar Clock Manually). LOCKING AND UNLOCKING THE UNIT The RM822 / RM823 has a special locking feature that locks all keys to prevent accidental operation of the unit. To unlock the unit, slide the [ ] switch to the unlocked position. The unit must be unlocked before activating any keys. CALENDAR CLOCK DISPLAY MODES The RM822 /RM823 supports four display modes in the sequence of: MODE 1 Local Time Hour, Minute, Seconds ------------------------------------------- Day, Month MODE 2 Local Time Hour, Minute, Day-of-the-Week ------------------------------------------- Day, Month MODE 3 Local Time / Second Time-Zone Time ( localtime ) Hour, Minute, Day - of - the - Week ------------------------------------------- ( Second time - zone time ) Hour, Minute MODE 4 Second Time-Zone Hour, Minute, Day-of-the-Week ------------------------------------------- Day, Month Display description for each time / date / time-zone mode To select a different time-display mode: - Press [MODE]. The display will advance in the order as mentioned above. Note: The bottom line of the display will be replaced by the alarm time if [ ] is pressed. HOW TO SET THE CALENDAR CLOCK MANUALLY When the unit is outside of the 1500km radius of the radio signal generated from DCF77 Frankfurt, Germany (UK version MSF Rugby), the unit may require manual setting. To manually set the clock: Press [MODE] hold for 3 seconds. Steps Setting Action 1. Hours Adjust with or and confirm with MODE 2. Minutes Adjust with or and confirm with MODE Note: Once you modify the minutes, the seconds are set to “00”. 3. Current Date Adjust with or and confirm with MODE 4. Month Adjust with or and confirm with MODE 5. Abbreviated, Adjust with or and confirm with MODE 4-language (see: abbreviated four language day-ofday- of-the-week the-week chart) 6. Day-of-the-week Adjust with or and confirm with MODE 7. Offset for other Adjust with or and confirm with MODE time zone Note: “ZONE” is shown (see: Time Zone Offset Table) [FIG. C] REVEIL DE VOYAGE RADIO PILOTE MODELE : RM822 (VERSION ANGLAISE RM823) LIVRET D’INSTRUCTIONS INTRODUCTION Nous vous remercions pour l’acquisition de ce reveil de voyage radio-pilotee (FR) (RM822). Le RM822 / RM823 est une p...

Download now

Please, enter two numbers from picture: