your own OGM, it will be used when the answering machine answers the call. If your 4. Press
1 INSTALLING YOUR PHONE 1.1 1.2 1.3 If you have a Broadband Line If you connect your telephone to a line with a broadband connection, you will need to insert a micro-filter between the telephone and the telephone line, otherwise you may get interference between the telephone and the broadband, which could cause problems. In a home with broadband, every telephone must have a micro-filter connected, not just the one at the telephone point that your modem is connected to. If you need more broadband
It is shown in hours, minutes and seconds format (HH:MM:SS). 4.2 Answer a Call If the handset is not on the base or a charging cradle: When the phone rings, press
Do not connect the Symphony extension to a payphone. The ringer equivalence numbers (RENs) of all instruments (phones, fax machines, etc.) connected to an exchange line must not add up to more than 4 — otherwise, one or more of them may not ring answer calls correctly. The Symphony 2210 telephones have a REN of 1 unless marked 3 Read these notes first Before you install your Symphony 2210 — Choosing a site for the base unit telephone and charger pod The base unit and charger pod(s) should be pla
1. Press
15 4.1.3 CALL FROM THE PHONEBOOK .............................................................................. 15 4.1.4 CALL FROM THE CALL LIST .................................................................................. 15 4.1.5 CALL FROM THE REDIAL LIST................................................................................ 15 4.1.6 CALL TIMER ........................................................................................................ 15 4.2 ANSWER A CALL ...........
12 4.3 Answer a Call................................................................................................................................................12 4.4 End a Call.......................................................................................................................................................12 4.5 Adjust Earpiece and Handsfree Volume.....................................................................................................12 4.6 Mute a Call..
2 Press Ў TWICE • base Altogether, you can have up to five handsets registered to the base unit, as speak to the user. If the other handset does not answer, you can get back to To check whether a handset is registered, make sure mains power to the base 3 Press OK • volume numbers 2, 3, 4 and 5. the outside call by pressing INTERCOM again. unit is switched on and the handset is within range. The handset’s display 4 Press Ў SEVEN times • del hs With more than one handset registered to your base un
Press the LNR/P button [6] and the last dialed number will be automatically redialed. (You can redial a number consisting of no more than 32 digits.) Microphone mute You can turn off the handset microphone during a call. The calling party will not hear you. 1. Press the SEC button [4]. (When the microphone is turned off, the indicator light [2] flashes and the handset buttons are locked.) 2. To cancel the microphone mute, press the SEC button [4] once again. Inserting a pause in the dialed
C). 2. Insert a 9V battery (6F22 type) into the battery compartment [35] on the base unit [28] then close the compartment [35] with the cover [36] and fasten the cover [36] with the screw [37] (see Fig. D). 3. Connect one end of the phone line cord [42] to the phone line jack [40] at the base unit [28] rear side, and the other end of the phone line cord [42] to the phone line socket. 4. Insert the AC adapter [41] cable plug into its jack [39] at the base unit [28] rear side. Insert the AC ad