Votes - 0, Average rating: 0
(
)
)
|
manual abstract
TG5471_QG.fm Page 6 Wednesday, November 24, 2004 5:44 PM
Using Phone Book
a) Storing Names and Numbers
Press the soft keys (C) and ( ADD ), then enter a name and phone
number using dialing buttons (0–9) and the soft keys ( f and
g
) by following the display.
(Refer to page 39 in the Operating Instructions for details.)
b) Dialing from the Phone Book
Press the soft key (C) to search. Search for the desired item by
pressing [d] or [B], then press [C], [s], or the soft key ( CALL ).
(Refer to page 41 in the Operating Instructions for details.)
c) Chain Dial
You can dial a combination of phone book or manual key pad entries while
making a call. This feature can be used, for example, to first automatically
dial a calling card access number that you have stored in the phone book,
then manually or automatically dial your PIN, and then automatically dial the
destination number from the phone book.
Press [MENU], then press [1] to access the phone book, while you are
on a call. Search for the desired item by pressing [d] or [B], then
press the soft key ( CALL ).
• If required, repeat steps for any remaining numbers.
(Refer to page 42 in the Operating Instructions for details.)
Using Caller List
Please make sure that you have already subscribed to Caller ID service.
a) Viewing the Caller List
Press the soft key ( C I D ), then press [d] to search the Caller List.
(Refer to pages 34 and 35 in the Operating Instructions for details.)
b) Calling Back from the Caller List
Press [C] or [s] while you are viewing a phone number to call back.
If you need to edit a phone number before calling back, press the soft
key ( EDIT ). You can delete “1” or “1 with area code” by pressing the
soft key ( EDIT ) repeatedly.
(Refer to page 36 in the Operating Instructions for details.)
c) Caller ID Number Auto Edit
Once you call back an edited number (see above), this unit can
automatically edit incoming phone numbers from the same area code in the
Caller List and each time you receive a call.
You need to turn on this feature. (*Factory preset is ON.)
(Refer to page 37 in the Operating Instructions for details.)
– 6 –
...