Votes - 2, Average rating: 4
(
)
)
|
manual abstract
For AM Reorient the antenna horizontally until reception improves. 2-D Muting the Radio Press [SNOOZE/MUTE] while listening to the radio. [OFF] [+, -, TUNE/CLOCK] Memory Buttons ([M1], [M2], [M3], [M4] and [M5]) [SNOOZE/MUTE] VOLUME Control [FM/AM, RADIO] Loud For FM Extend the cord and place the antenna in a location where reception improves. For AM Reorient the antenna horizontally until reception improves. 2-D Muting the Radio Press [SNOOZE/MUTE] while listening to the radio. 2-A Manual Tuning 1 Press [FM/AM, RADIO] to turn the radio on. 2 Press [FM/AM, RADIO] to switch between FM and AM. 3 Tune in to the desired station by pressing [+, TUNE/CLOCK] or [–, TUNE/CLOCK]. • Press and hold [+] or [–] to search faster. 4 Adjust the volume using the VOLUME control. To turn the radio off Press [OFF]. 2-B Preset Tuning You can assign one FM station and one AM station to each of the 5 memory buttons ([M1], [M2], [M3], [M4] and [M5]) for a total of 10 stations. To preset stations 1 Press [FM/AM, RADIO] to turn the radio on. 2 Press [FM/AM, RADIO] to switch between FM and AM. 3 Tune in to the desired station by pressing [+, TUNE/CLOCK] or [–, TUNE/CLOCK]. • Press and hold [+] or [–] to search faster. 4 Press and hold a memory button ([M1] to [M5]) until the memory number is displayed. • To turn the radio off, press [OFF]. Ex. Memory Number 1 •If you assign another station of the same band (FM or AM) to the memory button, the previously assigned station will be erased. •If a power failure occurs, station presets will be retained for about 10 minutes. To listen to preset stations 1 Press [FM/AM, RADIO] to turn the radio on. 2 Press [FM/AM, RADIO] to switch between FM and AM. 3 Press the desired memory button ([M1] to [M5]). • To turn the radio off, press [OFF]. •“ ” flashes on the display. •To release the mute, press [SNOOZE/MUTE] again. 2-E Changing the FM Tuning Sensitivity You can change the sensitivity used for tuning in FM stations from 0.2 MHz (factory preset) increments to 0.1 MHz. •Note that if you change the sensitivity, all FM station presets (2-B) and the station used for the radio alarm (4-A) will return to the factory preset. The buzzer will sound at the set radio alarm time. 1. Press [FM/AM, RADIO] to turn the radio on. 2. Press [FM/AM, RADIO] to switch to the FM band. 3. Press and hold [FM/AM, RADIO] for about 5 seconds. •The display changes to show the lowest available FM frequency. •To change the sensitivity back to 0.2 MHz increments, repeat the procedure above. •If the AM band is selected and you press and hold [FM/AM, RADIO] for about 5 seconds, the band will change to FM but the FM tuning sensitivity will not change. 3 Using the Sleep Timer Section 3 3-A Setting the Sleep Timer The sleep timer turns the radio off after a set time. [SLEEP] While the radio is on, press [SLEEP] Ex. Sleep Time: 30 min. repeatedly to select the time (minutes). •Each time you press [SLEEP], the time will change as follows: 30 60 90 120 OFF •The radio will automatically turn off after the selected sleep time. •You cannot set the sleep timer while an alarm is sounding (4-A, 4-B). To view the time remaining: Press [SLEEP]. To change the setting 1. Press [SLEEP]. (The time remaining is displayed.) 2. Immediately after the time remaining is displayed, press [SLEEP] repeatedly to select the sleep time. For assistance, please call: 1-800-211-PANA(7262) 4 Using the Alarms Section 4 The charger unit features an alarm clock. You can set the alarm to play the radio or to sound a buzzer at a set time. The radio alarm and the buzzer alarm can be set separately. [RADIO, ALARM SET] Memory Buttons VOLUME Control [OFF] [+, -, TUNE/CLOCK] ([M1], [M2], [M3], [M4] and [M5]) [SNOOZE/MUTE] [BUZZER, ALARM SET] [ALARM ON/OFF] [FM/AM, RADIO] 4-A Setting the Radio Alarm 1 Press [RADIO, ALARM SET]. • If you do not proceed to the next step within 5 seconds, the display will return to the current time. 2 Adjust the alarm time by pressing [+, TUNE/CLOCK] or [–, TUNE/CLOCK]. • Pressing and holding [+] or [–] changes the time faster. 3 Press [RADIO, ALARM SET]. • The radio will automatically turn on. 4 Press [FM/AM, RADIO] to switch between FM and AM. 5 Press the desired memory button ([M1] to [M5]). OR Tune in to the desired station by pressing [+, TUNE/CLOCK] or [–, TUNE/CLOCK]. Ex. Memory Number 1 is 6 Adjust the volume by using the VOLUME set to AM 520 kHz. control. 7 Press [RADIO, ALARM SET] to save the radio alarm time and the station. • The selected station stops flashing and disappears. • The selected alarm time returns to the current time. • “ ” is displayed while the radio alarm is turned on. • The radio will turn off. •The radio will automatically turn on at the set time and will turn off after 1 hour. •You can exit alarm setting mode any time by pressing [OFF]. •To change only the radio alarm time, repeat steps 1 to 3, then press [RADIO, ALARM SET]. •If a power failure occurs, the radio alarm time and station preset will be retained for ab...