Votes - 2, Average rating: 4
(
)
)
|
manual abstract
This handset is an accessory cordless handset, for use with Panasonic base unit KX-TG2970. This installation manual only describes the steps necessary to start up the handset. Please read the base unit operating instructions for further details. Accessories (included) For extra orders, call 1-800-332-5368. ACharger Unit . . . . . . . . . . . . . . . . . . . . . . . . .1 ABattery . . . . . . . . . . . . . . . . . . .1 Charger Order No. PQLV30028ZB Order No. HHR-P402 AC Adaptor Order No. KX-TCA1-G (KX-TCA1) ABelt Clip . . . . . . . . . . . . . . . . . .1 AHandset Cover. . . . . . . . . . . . . . . . . . . . . . . .1 Order No. PQKE10340Z2 Order No. PQYNTG2970BR Installation Connecting the Charger unit Power Outlet (AC 120 V, 60 Hz) AC Adaptor • USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX-TCA1-G). • The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) • The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. Installing the battery Insert the battery (1), and press it down until it snaps into the compartment (2). Close the cover. 21 For assistance, please call: 1-800-ADT-ASAP – 1 – PQQX14266ZA S0804-1094 Charging the battery Place the cordless handset on the charger and charge for 6 hours before initial use. • The unit beeps once, the CHARGE indicator lights and “Charging” is displayed. • When the battery is fully charged, “Charge completed” is displayed if there are no new calls in the Caller List. • Recharge the battery when: —“Recharge battery” is displayed on the cordless handset, —“3” flashes, or — the cordless handset beeps intermittently while it is in use. • If the battery has been discharged, the cordless handset will display “Charge for 6 HRS” and “4” when you place the cordless handset on the charger. The cordless handset will not work unless the battery is charged. Continue charging. Handset battery information After your Panasonic battery is fully charged, you can expect the following performance: CHARGE Indicator Charge Contacts Operation Operating time While in use (TALK) Up to 6 hours While not in use (Standby) Up to 14 days While using the Clarity Booster feature Up to 4 hours • Clean the charge contacts of the cordless handset and the charger with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly. Belt Clip You can hang the cordless handset on your belt or pocket using the included belt clip. To attach the belt clip To remove the belt clip While pressing the top of the clip (1), pull the right edge in the direction of the arrow (2). 2 1 – 2 – Registration This cordless handset must be registered to the KX-TG2970 base unit. The cordless handset will be assigned the extension number at registration. Only one cordless handset can be registered at a time. Charge the battery fully. Make sure the base unit and the other cordless handsets are not being used. Have both the cordless handset and base unit nearby during registration. O KO K [-] Press MUTE on base unit, then OK on handset to register handset [MUTE] and Indicator To operate “ ”, press the right soft key. OK The cordless handset display shows the instructions as shown Press MUTE on on the right. base unit, thenOK on handset to register handset OK 1 Base unit: Press [MUTE]. • The MUTE indicator flashes. After the MUTE indicator starts flashing, the rest of the procedure must be completed within 1 minute. 2 Cordless Handset: (1) Press the soft key ( OK). (2) Wait until 3 beeps sound and the display shows the new extension number. • Registration is complete. SPIPRIVACY1Handset Registering IN USE [-] SPIPRIVACY1Handset [2] Registered IN USE [2] Ex. Extension number 2 • The registered number “[1]” to “[3]” is shown on the top right of the display. • You can stop registration by pressing [OFF] on the cordless handset and pressing [MUTE] on the base unit. To cancel the handset registration, please see your base unit Operating Instructions. For assistance, please call: 1-800-ADT-ASAP – 3 – Optional Headset Connecting an optional headset to the cordless handset allows hands-free phone conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA88HA, KX-TCA91, KX-TCA92 or KX-TCA98 headset. To order, call the accessories telephone number on page 1. Connecting an optional headset Open the headset jack cover, and insert the headset plug into the headset jack as shown below. Headset Jack • Headset sold separately. Model shown here is KX-TCA88. Wall Mounting The charger can be wall mounted. Connect the AC adaptor. Install screws using the wall template (see below). Mount the charger (A). Slide it down (B), then slide down to the right (C) until it is secured. To Power Outlet Screws (not included) ABC2.45 cm (31.32")...