Votes - 5, Average rating: 4.6
(
)
)
|
Other manuals for this model:
Cordless Phones - KXTG9332 (440.85 kb)
Cordless Phones - KXTG9332 (2.17 mb)
Cordless Phones - KXTG9332 (435.47 kb)
manual abstract
– The message indicator on the handset flashes slowly if message alert feature is turned on (“Message alert”; page 39). 1 Press {C}, then press {VM} within 15 seconds. OR {MENU} i {#}{3}{3}{0} L The speakerphone turns on. 2 Follow the pre-recorded instructions. 3 When finished, press {OFF}. Note: L If {VM} is not displayed, the voice mail access number has not been stored. Store the number (page 40). L If the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding {OFF} until the handset beeps. L If your voice mail service uses voice mail tones and a message is over 3 minutes long, the handset may not indicate new messages. L If your voice mail service uses voice mail tones, the tones are heard from any phone connected to the same line. If you want to use another phone to listen to voice mail messages, you have to dial your access number manually. For assistance, please visit Intercom/Locator Intercom Intercom calls can be made: – between handsets. – between the handset and base unit. Note: L If you receive an outside call while talking on the intercom, you hear 2 tones. – To answer the call with the handset, press {OFF}, then press {C}. – To answer the call with the base unit, press {SP-PHONE} 2 times. (KX-TG9341/KX-TG9342/ KX-TG9343/KX-TG9344) L When paging unit(s) for an intercom call, the paged unit(s) beeps for 1 minute. Making an intercom call Handset 1 {INTERCOM} 2 {V}/{^}: Select the desired unit. i {Select} L To stop paging, press {OFF}. 3 When you finish talking, press {OFF}. Base unit ¦ KX-TG9331/KX-TG9332/ KX-TG9333/KX-TG9334 1 {INTERCOM} L All registered handsets beep. L To stop paging, press {INTERCOM}. 2 When you finish talking, press {INTERCOM}. ¦ KX-TG9341/KX-TG9342/ KX-TG9343/KX-TG9344 1 {INTERCOM} 2 To page a specific handset, enter the handset number. To page all handsets, press {0} or wait for a few seconds. L To stop paging, press {INTERCOM}. 3 When you finish talking, press {INTERCOM}. Answering an intercom call Handset 1 Press {C} to answer the page. 2 When you finish talking, press {OFF}. Base unit 1 Press {INTERCOM} to answer the page. 2 When you finish talking, press {INTERCOM}. Note for handset and base unit: L When the ringer volume for outside calls is set to off (page 18, 26), the handset and/or base unit rings at a low level for intercom calls. Transferring calls, conference calls Outside calls can be transferred between 2 handsets, or between the handset and base unit. The handset and base unit, or 2 handsets can have a conference call with an outside party. Handset 1 During an outside call, press {INTERCOM} to put the call on hold. 2 {V}/{^}: Select the desired unit. i {Transfer} For assistance, please visit Intercom/Locator 3 Wait for the paged party to answer. L If the paged party does not answer, press {C} to return to the outside call. 4 To complete the transfer: Press {OFF}. L The outside call is being routed to the destination unit. To establish a conference call: Press {Conf}. L To leave the conference, press {OFF}. The other parties can continue the conversation. L To put the outside call on hold, press {HOLD}. To resume the conference, press {Conf}. Base unit ¦ KX-TG9341/KX-TG9342/ KX-TG9343/KX-TG9344 1 During an outside call, press {INTERCOM} to put the call on hold. 2 To page a specific handset, enter the handset number. To page all handsets, press {0} or wait for a few seconds. 3 Wait for the paged party to answer. L If the paged party does not answer, press {INTERCOM} to return to the outside call. 4 To complete the transfer: Press {SP-PHONE}. L The outside call is being routed to the handset. To establish a conference call: Press {CONF}. L To leave the conference, press {SP-PHONE}. The other 2 parties can continue the conversation. L To put the outside call on hold, press {HOLD}. To resume the conference, press {CONF}. Answering a transferred call Handset Press {C} to answer the page. Base unit ¦ KX-TG9341/KX-TG9342/ KX-TG9343/KX-TG9344 Press {SP-PHONE} to answer the page. Note for handset and base unit: L After the paging party disconnects, you can talk to the outside caller. Handset locator You can locate a misplaced handset by paging it. 1 Base unit: {LOCATOR} L All registered handsets beep for 1 minute. 2 To stop paging: Base unit: Press {LOCATOR}. Handset: Press {INTERCOM}, then press {OFF}. Note: L When the ringer volume for outside calls is set to off (page 26), the handset rings at a low level for paging. For assistance, please visit Useful Information 44 For assistance, please visit Wall mounting Important: L The wall mounting adaptor is not supplied with KX-TG9341/ KX-TG9342/KX-TG9343/ KX-TG9344, but it is available as an option. Base unit 1 Lead the telephone line cord through the hole in the wall mounting adaptor in the direction of the arrow. 2 Tuck the ...