Votes - 2, Average rating: 4 ( )

Manafacture: Audiovox File size: 1.09 mb File name: Language of manual:

The user answers the call by pressing YES (3) and ends the call by pressing NO (5) . Pressing NO (5) during ringing rejects the incoming call and both calling and called handsets return to standby state. External call When an external call comes, the display will show the caller’s number and time. If the handset is on charge unit (i.e. on base station), simply picking up the unit will cause it to answer. If it is not, then press YES (3) to answer or press NO (5) to stop the ring. “UNKNOWN ” would be displayed during an incoming call if Caller ID service is not activated, or if a network does not pass on this information, or if callers withhold their numbers. MAKING A CALL Calling an External Number In this case, the user goes off hook’ using the YES (3) key, then dials the number in the standard way. Once the user has chosen to go off-hook, the phone has no way of sensing that the dialing of the number is finished. Therefore the display will revert to showing the elapsed call duration after a 5-second timeout. Pre-dialing Here the user enters the number and can edit and correct it before going ‘off hook ’, at which point the number is actually dialed. Calling from Alphanumeric Memory The user dials a number, which has already been stored in one of the alphanumeric memories. Entries in the memories are stored in alphabetical order, or in the case where two memories have the same alpha name, they will be stored in the numeric order. If a number exceeds 10 digits, the first 10 digits are shown initially. As with other lists and menus, the memory lists will wrap around. Calling another Internal Handset Press and hold INT (REDAIL/PAUSE) (4) button for 1 second to activate an internal call to call another handset that is registered on the same base. The display will show “INT? ” enter the hand set to call by dialing 1–4. If the called handset is not subscribed (number has not been allocated), does not respond or the handset is busy, the user will be given a “busy tone ”. Press NO (5) to end the call. E - 12 9038_2_ib_e.p65 12 10/31/03, 12:20 PM TELEPHONE OPERATION Last Number Redial In the on hook mode, press the REDIAL (INT/PAUSE) (4) button to show the last dialing number on display. The user can select up to last ten external numbers by pressing the 5/6(6) buttons. These are stored in chronological order, with the most recent being displayed first. Then press the YES (3) button to dial the selected number. If there are no numbers in the list, then the redial button will show “NO ENTRIES”. As with other lists and menus, the redial list will wrap around. TRANSFERRING AN EXTERNAL CALL It is not possible to transfer internal calls from one internal extension to another - the users must redial. The facility to transfer an external call is described here. Transferring to another registered handset If the user needs to transfer an outgoing or incoming call to another handset registered to the same base station, this is done by pressing the INT (REDIAL/PAUSE) (4) key for 1 second, followed by the internal telephone number. The call transfer is completed by pressing the NO (5) key to return to standby state or aborted by pressing the INT (REDIAL/PAUSE) (4) key for 1 second again. The call duration timer is not transferred between internal extensions. Transferring using the Flash Key If the base station is connected to a PABX extension, then the OFF HOOK/YES (3) key may be pressed during a call to send a Flash to the PABX. Call transfer to another PABX extension is then handled according to the procedure specified by the PABX. E - 13 9038_2_ib_e.p65 13 10/31/03, 12:20 PM E - 14 MEMORY OPERATION This describes how memory is managed - how numbers are added, removed and edited. All of these memory functions use the menu system. ADDING A NEW ENTRY TO MEMORY • Enter the Phonebook mode by pressing scroll keys 5/6(6), then press YES (3). • Select the “STORE” then enter the Name and Number respectively. • Press the YES (3) to confirm the corresponding input item. Particular points to note are: • Alpha characters are entered by pressing the number keys, which cycle round the available characters. For example, pressing the 2 key once shows ‘A’, pressing it again changes the character to ‘B’, pressing it again gives ‘C’, pressing it again gives ‘2’, then ‘A’ again etc. The user interface waits at each letter position until a key is pressed, then stays there until no key is pressed for 3 seconds, at which point it moves on to the next letter position. The user can correct entries using the 5(6) key. • Pauses in the dialling sequence may be programmed as part of the number by pressing the Pause (REDIAL/INT) (4) key during the number sequence. • Holding down the NO (5) key at any point allows the user to abort the procedure. EDITING A MEMORY ENTRY Both the alpha name field and the phone number field of a memory entry can be edited. This allows the user to change entries whose names have been misspelled or when their contacts move hou...

Download now

Please, enter two numbers from picture: