. Adjust the viewing angle with the key, 7. . Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. Adjusting the display brightness If your car radio has been connected as described in the fitting instructions, the display brightness will switch with the headlights. The display brightness can be set at separate levels for day and night in steps from 1 to 9. Daytime display brightness . Press the MENU button, 8. . Press the or button, 7, as often as is nec

Oppna Por favor, abrir Favor abrir 7914 2 3 6 101213 8 1 4 11 5 7914 2 3 6 101213 8 1 4 11 5 OPERATING ELEMENTS 1 button for opening the control unit 2 Button for switching the device on and off and for muting the device 3 Volume control 4 Softkeys. The function of the Softkeys depends on the contents of the display at the time 5 OK button for confirming menu entries and for leaving the menu 6 DEQ button for calling up the equalizer menu 7 Multi-function rocker 8 MENU button, which calls up the

disc and tracks names) is displayed continually or just once when a new track begins or a new MD is inserted. Switching scrolling text on/off . Press the MENU button, 8. . Using the / buttons, 7, select current status, either “SCRL ON” or “SCRL OFF”. . Press button or , 7, to switch scrolling on or off. . Press the OK button, 5, or the MENU button, 8, to exit the menu. Your settings have been saved. Traffic announcements during MD operation . If you wish to receive traffic announcements during M

33 Road Safety .................................. 33 Fitting............................................ 33 Accessories .................................. 33 Release Panel ........................ 34 Switching On and Off............. 35 Adjusting the Volume............. 36 Radio Operation ..................... 38 Switching on Radio Operation ....... 38 RDS Convenience Function (AF, REG) ..................................... 38 Select Waveband/Memory Level ... 38 Setting the Station .............

Six stations can be stored on each memory level. RADIO MODE . In order to switch between memory levels or wavebands, briefly press the BND/TS button 5. Tuning into a station There are various methods available for tuning into a station. Automatic station search mode . Press the or button :. The unit tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually. . Press either the or buttons :. Note: . You can only tune into stations manually if th

“MIX ALL” appears briefly on the display and MIX lights up. Note: . In the case of CD changers CDC A 08 and IDC A 09, all CDs in the changer are randomly selected. All other changers first play all the tracks on a CD in random selection before moving to the next CD in the changer. Stopping MIX . Press the button 5 MIX > until “MIX OFF” appears briefly on the display and MIX goes out. Scanning all tracks on all CDs (SCAN) . To listen in briefly to all the tracks on all inserted CDs in ascending o

The unit reverts to the programme previously listened to when the traffic announcement is over. Switching traffic information priority on/off . Press the TRAF button ?. Priority for traffic announcements is activated when the traffic-jam symbol lights up on the display. Note: You will hear a warning tone, . if you leave the reception area of a traffic information station to which you are currently tuned in; . if you leave the reception area of a traffic information station when you are listening

After removing the flip/release panel, the unit switches itself off. All the current settings are saved. . If there is a CD in the unit, it remains there. Attaching the flip/release panel . Slide the flip/release panel from left to right into the unit guide. . Press the left side of the panel into the unit until it slots into place. Note: . Do not press against the display while attaching the flip/release panel. If the device was switched on when the panel was removed, it will switch itself bac

5 BND button (band), source selection for radio mode, selection of FM memory levels and the wavebands MW and LW (MW and LW are not available on the Dusseldorf C51 and Kansas DJ51 units) TS, starts the Travelstore function. 6 Display (display field) 7 button - indicates the time on the display DIS, change display contents 8 MENU button - selects the menu for basic settings 9 button - opens the flip/release panel : Arrow-key block ; OK button - confirms menu entries and starts the scan function <

. The unit switches off after the control panel is removed. . All the current settings are saved. . Any CD already inserted in the unit remains there. Attaching the control panel . Slide the control panel from left to right into the unit’s panel locking mechanism. . Press the left-hand edge of the control panel into the unit until it clicks into place. Note: . When attaching the control panel, make sure you do not press the display. If the unit was still switched on when you removed the control