Votes - 4, Average rating: 4.8 ( )

Manafacture: JVC File size: 1.57 mb File name: gnt0065-001b.pdf Language of manual:

Photos and specs  JVC  UX-N1S

• The stored program is erased. Playing at Random—Random Play 1 Press until the RND (random) indicator appears on the display before you start playback. 2 Playback starts in random order. Random Play ends when all tracks are played. Operations on the Random Play Mode To Press To skip a track • 4 does not work. To exit from random play Press once while playback is stopped to exit from the random play. Playing Repeatedly—Repeat Play 1 Press repeatedly before you start playback to specify the repeat mode as follows: REP 1 REP GRP (MP3 only) REP OFF REP ALL REP 1 Repeats the current (or specifi ed) track. REP GRP Repeats all tracks in the current group. (MP3 only) REP ALL Repeats all tracks. REP OFF Normal playback 2 Basic Disc Operations To Press On the System On the remote Playback the disc Current track number and elapsed playing time appear on the main display. • During playback, press again to stop playing for a moment. Stop playback • While playback is stopped, total track number and total playing time (for MP3 disc, group number and track number) appear on the main display. Select a track Increases the track numbers. Decreases the track numbers. Select a group (MP3 only) — Increases the group numbers while playback is stopped. — Decreases the group numbers while playback is stopped. Forward search / Reverse search — Fast-forwards the track by pressing briefl y. To stop searching, press 6. — Fast-reverses the track by pressing briefl y. To stop searching, press 6. NOTES • If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is loaded, playback will not start. • If no disc is inserted, “NO DISC” appears on the main display. Precautions Notes on the power cord • When you are away on travel or otherwise for an extended period of time, remove the plug from the wall outlet. A small amount of power (3.6 W) is always consumed while the power cord is connected to the wall outlet. • When unplugging the System from the wall outlet, always pull the plug, not the power cord. • Do not handle the power cord with wet hands. • Disconnect the power cord before cleaning the System or moving the System. • Do not alter, twist or pull the power cord, or put anything heavy on it, which may cause fi re, electric shock, or other accidents. • If the cord is damaged, consult a dealer and have the power cord replaced with a new one. Avoid moisture, water, dust, and high temperatures • Do not place the System in moist or dusty places. • If water gets inside the System, turn off the power and remove the plug from the wall outlet, then consult your dealer. Using the System in this state may cause a fi re or electrical shock. • Do not expose the System to direct sunlight or place it near a heating device. Notes on installation • Select a place which is level, dry and neither too hot nor too cold between 5.C and 35.C. • Do not install the System in a place subject to vibrations. • Do not put heavy objects on the System. To prevent malfunction or damage of the System • Do not insert any metallic objects, such as wires, hairpins, coins, etc. into the System. • Do not block the vents. To clean the cabinet • Use a soft cloth. Follow the relevant instructions on the use of chemically-coated cloths. • Do not use benzene, thinner or other organic solvents and disinfectants. These may cause deformation or discoloring. There are no user-serviceable parts inside. If anything goes wrong, unplug the power cord and consult your dealer. 1 Hold 2 Insert 3 Release Outdoor FM antenna (not supplied) For better FM/AM reception FM antenna (supplied) Extend it so that you can obtain the best reception. Getting Started NOTE DO NOT turn off (standby) the System with the volume set to an extremely high level; Otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the System or start playback. Using Headphones Be sure to turn down the volume before connecting or wearing the headphones. • Connecting the headphones will deactivate the speakers. Operating on the System To Press Turn on or off (standby) the power The standby lamp on the System turns off /on. Select a source* See “Playing Back Discs” on page 4. See “Listening to FM and AM Broadcasts” on page 5. See “Connecting a Portable Audio Device” on page 6. Adjust the volume You can adjust the volume level from level 0 (VOL MIN) to level 31 (VOL MAX). Operating on the Remote Control To Press Turn on or off (standby) the power The standby lamp on the System turns off /on. Select a source See “Playing Back Discs” on page 4. See “Listening to FM and AM Broadcasts” on page 5. See “Connecting a Portable Audio Device” on page 6. Adjust the volume You can adjust the volume level from level 0 (VOL MIN) to level 31 (VOL MAX). Drop the volume in a moment To restore the volume, press again, or adjust the volume level. Reinforce the bass sound AHB PRO indicator appears on the display. To cancel this function, press agai...

Download now

Please, enter two numbers from picture: