Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
To momentarily stop playback 26 FM wire aerial 15 Play mode/program button 27 Function selector switch 16 PTS button: to select your favourite cd track for waking 28 Volume control up to music 29 Earphone jack 17 Alarm 1 button: to set alarm 1 30 Battery compartment 18 button: to stop cd playback 31 Alarm 2 indicator 19 MIN Skip/fast search/selection ( backward): 32 FM stereo indicator -to skip cd tracks and for minute setting of alarm clock functions and time. (quick selection: press and hold normal selection: press repeatedly) P.2 Setting the clock time 1 While holding down the TIME button, press the or to set the desired time. 2 Release the button to save time setting. Radio operation FM wire aerial To obtain the maximum FM reception fully extend the wire FM aerial (which is located at the rear of the unit) and alter the direction of the wire for best results. The aerial for the MW waveband is located inside the unit. To obtain the maximum MW reception rotate the clock radio. 1 Slide the FUNCTION SELECTOR switch to select MW or FM. 2 Press the POWER on/off button. 3 Adjust the VOLUME control to a suitable level. 4 Slowly adjust the TUNING control to select your desired station. The FM LED indicator will light up when an FM stereo signal is received. 5 To switch off the radio, press the POWER on/off button. To play compact disc 1 Press the power on/off button. 2 Open the cd door using cd open tab, load a disc in the cd compartment. Push down gently on the door to close. 3 Select the cd mode by switching the function selector to cd. 4 Press the play/pause button. The display will show the track number when you begin to play a cd. After a few seconds, the display reverts to the current time. Note : The same button can be used to momentarily interrupt playback. The track number will flash until the button is pressed again. 5 Adjust the volume control until the desired level is reached. 6 Press the stop button to stop playback. 7 To switch off the cd, press the power on/off button. P.3 P.4 Other cd functions SKIP/FAST REVERSE SEARCH 1 Press once to skip to the next track or as many times as required to reach desired track. Press the to return to the beginning of the current track or as many times as required to go back to desired track. Press or and hold for fast search within the current track. REPEAT button 1 Press once to repeat the track. The repeat indicator will flash. 2 Press again for the whole cd to be repeated, the repeat indicator will light up. 3 Press again to cancel the repeat function. Repeat LED indicator will go out. RANDOM 1 Press P. mode button once for random playback of all cd tracks. If a program has been set press twice. The random LED indicator will light up. 2 Press again to cancel the function. Repeat and random modes can be used simultaneously. When the cd compartment is empty or a cd is incorrectly loaded or damaged the ‘no’ (no disc) symbol will be displayed. Setting alarm The unit allows you to select two different wake-up times that can be used separately or simultaneously (ALARM 1 OR 2 OR ALARM 1 and 2). Before setting the alarm, switch the alarm selector switch to either alarm 1 or alarm 2 or alarm 1 and 2. ALARM 1: Press and hold the alarm 1 button, and then or to set the desired wake-up time. Release alarm button to save the setting. ALARM 2: Press and hold the alarm 2 button and proceed as above. Set the function selector switch to AUTO, (then set function selector switch to either MW or FM for radio or cd for cd music) BUZZ (for buzzer) or OFF to cancel alarm. Waking up to the radio 1 Follow the instructions given under ‘Radio operation’ to select the desired radio station. 2 Set ALARM function switch to AUTO alarm indicators will light up. Then set function selector switch to either MW or FM. P.5 Maintenance Do not expose your cd clock radio to extremes of temperature. The product should be kept in a warm environment free from dust and damp. For external cleaning use only a soft, clean, damp cloth. Use of detergents may damage the finish. Technical specification AC Power supply : 230v 50Hz Battery back-up : 9V DC type 6LR61/PP3 (not included) CD player : Frequency response (3dB) 100Hz to 18kHz Laser : = 780nm Max power = 5mW Radio : FM 88Mhz - 108Mhz : MW 540Khz - 1600Khz Earphone socket : 3.5mm WARNING : This unit uses a laser beam. To prevent an accident occuring the unit should only be opened by a qualified engineer. If the door interlocks become defective the laser may cause invisible radiation. Avoid exposure to the beam. If there is a scratch, dirt or finger prints on the cd, it may cause tracking errors. Before playing, clean the cd with a clean cloth. Wipe the cd from the centre outwards. After playing, store the disc in its cd case. For indoor use only. Warning labels WARNING: to reduce the risk of electric shock, do not expose this appliance to rain or moisture. ATTENTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceab...