|
manual abstract
Notes • Discs with non-standard shapes (e.g., heart, square, star) cannot be played on this unit. Attempting to do so may damage the unit. Do not use such discs. • If you press CD u when there is no disc in the CD compartment, “00” flashes for a few seconds on the display and the unit turns off automatically. Playing the radio 1 Press RADIO ON to turn on the radio. “On” appears in the display. 2 Adjust VOLUME. 3 Select BAND. 4 Tune in a station using the TUNING dial. •To turn off the radio, press x OFF. • This model does not support FM stereo. Improving the reception FM: The AC power cord functions as an FM antenna. Extend the AC power cord fully to improve FM reception. AM: Rotate the unit horizontally for optimum reception. A ferrite bar antenna is built into the unit. Do not operate the unit over a steel desk or metal surface, as this may lead to interference of reception. Listening to the sound from the connected optional components 1 Connect the AUDIO IN jack of this player with the line output jack or headphones jack of the optional component (ex: portable music players) using the stereo audio connecting cable. 2 Press AUDIO IN. The AUDIO IN indicator lights up. 3 Play the optional component connected to the AUDIO IN jack of this player. 4 Adjust VOLUME. •To turn off the AUDIO IN, press x OFF. Note Connect the cable firmly to avoid any malfunction. Setting the Alarm This unit is equipped with 3 alarm modes—CD, RADIO and buzzer. Before setting the alarm, make sure to set the clock (see “Setting the Clock”). This unit is also equipped with a dual alarm function. You can set the alarm for two different times ALARM A and ALARM B. To set the Alarm time 1 If you will select the CD alarm or RADIO alarm, adjust the volume. Also, if you will select the RADIO alarm, tune in to the desired station. 2 Set the ALARM MODE selector to CD, RADIO or BUZZER. The ALARM A or B indicator lights up. 3 Press ALARM A or B for a few seconds. The ALARM A or B indicator flashes, depending on which one you set. The hour will start to flash in the display. 4 Press TIME SET + or – until the desired hour appears. To set the hour rapidly, hold down TIME SET + or –. 5 Press ALARM A or B. The minute will flash. 6 Repeat step 4 to set the minute and press ALARM A or B. The wake-up track number flashes on the display. 7 IF you selected the CD alarm, press > or . to select the desired wake-up track number. The wake-up track number can be set up to 99. Its default value is “01”. 8 Press ALARM A or B. The ALARM A or B indicator lights up. For the CD alarm, the track you specified as the Wake-up track is played first. To check the Alarm time Press ALARM A or B. The display shows the alarm time. If you press ALARM A or B again, the indication changes to the wake-up track number. After a few seconds, the display returns to the current time. • Alarm time in CD alarm, radio alarm and buzzer alarm is set at PM 12:00 when you purchased the unit. ALARM ON For the CD alarm, the track you specified as the Wake- up track is played first. If you set the CD alarm when there is no disc in the CD player or the CD compartment lid is open, the buzzer alarm will sound at the set time. For the radio alarm, the station that the tuning dial is set to will be received. For the buzzer alarm, the beeping of the alarm becomes more rapid after every few seconds in three progressive stages. Note When ALARM A and ALARM B are set for the same time, only ALARM A will result. To doze for a few more minutes Press SNOOZE/SLEEP OFF. The CD, radio or buzzer alarm turns off but will be automatically activated again after about 10 minutes. Every time you press SNOOZE/SLEEP OFF, the snooze time changes as follows: 10 20 30 40 50 The display shows the snooze time for a few seconds and returns to show the current time. When you press SNOOZE/SLEEP OFF after the current time appeared, the snooze time starts from 10 minutes again. • The maximum length of the snooze time is 60 minutes. ALARM OFF The alarm is turned off automatically after 60 minutes. To stop the Alarm Press ALARM RESET to turn off the alarm. The alarm will come on again at the same time the next day. To deactivate the Alarm Set the ALARM MODE selector to OFF. ALARM A or ALARM B indicator goes off. Setting the Sleep Timer You can fall asleep to the CD, RADIO, or AUDIO IN using the built-in sleep timer that turns off the CD, RADIO or AUDIO IN automatically after a preset duration. Press SLEEP during CD, RADIO, or AUDIO IN play. You can set the Sleep Timer to durations of 90, 60, 30, or 15 minutes. Every push changes the display as follows: OFF (current time) 90 15 30 The CD, RADIO, or AUDIO IN will play for the time you set, then turn off. •To turn off the CD, RADIO or AUDIO IN before the preset time, press SNOOZE/SLEEP OFF. Note Even if the Sleep Timer is set, it cannot turn off the power of optional components connected to the AUDIO IN jack of this player. To use both the Sleep Timer and the Alarm You can fall aslee...
Other models in this manual:Radios - DREAM MACHINE ICF-CD815 (617.09 kb)