Votes - 4, Average rating: 4
(
)
)
|
manual abstract
You can choose between Europe (EUROPE), America (USA), Thailand (THAI) and South America (S-AMERICA). The tuner comes from the factory set for the region in which the unit was sold. Should you encounter problems with radio reception, please check this setting. This set of instructions refers to the “USA” setting. . Press the MENU button 8. . Press the fi button 7 repeatedly until “TUNER” appears on the display. . Keep pressing the @ or # button 7 until the desired region appears in the display. When you have finished making your changes, . press the MENU button 8 twice. Selecting the frequency range/ memory This unit can receive programmes broadcast over the FM and AM frequency ranges. There are three preset memory levels for the FM range and one for the AM range. Six stations can be stored on each memory level. Selecting the FM memory level or the AM frequency range respectively . Keep pressing the BND-TS button 4 to switch between the FM memory levels (FM1, FM2 and FMT) and the AM frequency range respectively. Tuning into a station There are various ways of tuning into a station. Automatic seek tuning . Press the fi or % button 7. The unit tunes into the next receivable station. Setting the sensitivity for station seek tuning You can configure the radio to only tune into stations with a strong reception or to also tune into those with a weak reception. . Press the MENU button 8. . Keep pressing the fi or % button 7 until “SENS HI” or “SENS LO” appears in the display. ENGLISH 11 RADIO MODE “SENS HI” means that the tuner is highly sensitive. “SENS LO” means it is set to the lower sensitivity setting. . Set the required sensitivity using the @ or # buttons 7. When you have finished making your changes, . press the MENU button 8. Tuning into stations manually You can also tune into stations manually. . Press the @ or # button :. Note: . Different seek tuning sensitivities can be set separately for FM and AM repectively. Storing stations Storing stations manually . Select the required memory level (FM1, FM2 or FMT) or the AM frequency range. . Tune into the station. . Press one of the station buttons 1 - 6 9 for longer than 2 seconds to store the station to that button. Storing stations automatically (Travelstore) You can automatically store six stations with the strongest reception in the region. The stations are stored in the FMT or AM memory depending on the selected frequency range. Note: . Stations that were previously stored in this memory are deleted in the process. . Press and hold the BND-TS button 4 until the seek tuning starts. The station storing procedure begins. “FM TSTORE” or “AM TSTORE” appears in the display. After the process is completed, the station that is stored in location 1 of the respective memory level will be played. Listening to preset stations . Select the memory level on which the station was stored. . Press the preset station button 1 - 6 9 of the station you want to listen to. Scanning receivable stations (SCAN) You can briefly listen in to all receivable stations by activating the scan function. You can set the scanning time to between 5 and 30 seconds in the menu. Starting SCAN . Keep the MENU button 8 pressed until the scan process starts. “SCAN” appears briefly in the display followed by the current frequency (which flashes). Stopping SCAN and continuing listening to a station . Press the MENU button 8. Scanning is stopped and the station that was tuned into last will remain active. RADIO MODE CD MODE Setting the scantime . Press the MENU button 8. . Keep pressing the fi or % button 7 until “SCAN TIME” appears in the display. . Set the required scantime using the @ or # buttons 7. When you have finished making your changes, . press the MENU button 8 twice. Note: . The set scantime also applies to scanning in CD and CD changer mode. Setting the display In radio mode, you have the option of continuously displaying the time or the frequency. . Keep the button 6 pressed until the required display appears. CD mode You can use this unit to play standard audio CDs, CD-Rs and CD-RWs with a diameter of either 5 or 3 inches. Risk of damage to the CD drive! Contoured CDs (shape CDs) are not suitable for playback in this unit. We accept no liability for any damage to the CD drive or CD that may occur as a result of the use of unsuitable CDs. Switching to CD mode . If there is no CD inserted in the drive and the unit is playing Radio or CD Changer (AUX) mode, . press the button 1. The release panel opens. . Gently insert CD with the printed side uppermost into the drive until you feel some resistance. The CD is drawn into the drive automatically. You must not hinder or assist the drive as it draws in the CD. . Gently close the control panel whilst exerting a little pressure until you feel it clicks into place. CD playback begins. . If a CD is already inserted in the drive and the unit is playing Radio or CD Changer (AUX) mode. . Keep pressing the SRC button : until “CD” appears in the di...
Other models in this manual:Radios - Atlanta CD34 (1021.68 kb)