Votes - 7, Average rating: 4.4 ( )

Manafacture: Blaupunkt File size: 304.93 kb File name: Language of manual:

Photos and specs  Blaupunkt  Daytona MP53

if you leave the reception area of a traffic information station when you are listening to a CD and the subsequent automatic search cannot locate a new traffic information station; . if you retune the radio from a traffic information station to one that does not broadcast traffic information. Either deactivate the priority for traffic information or switch to a station which broadcasts traffic information. Setting the traffic announcement volume . Press the MENU button 8. . Press the button : repeatedly until “TA VOLUME” appears on the display. . Use the or button : to set the desired volume. . Once the setting is completed, press the MENU button 8 or OK ;. Note: You can also adjust the volume during a traffic announcement for its duration by using the volume control 2. Note: You can also adjust the tone and volume balance for traffic announcements. Please see the “Tone and Volume Balance” section. CD MODE CD Mode You can use this device for playing standard CDs, CD-Rs and CD-RWs with a diameter of 12 cm. Besides playing CDs containing audio data on this device, you can also play CDs containing MP3 files. For further details, please read the chapter entitled “MP3 mode” that follows this chapter. To ensure the system functions properly, only use CDs labelled with the compact disc logo. Problems might be experienced when trying to play copy-protected CDs. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs! Risk of damage to CD drive! Single CDs with a diameter of 8 cm and CDs which are not circular (“shape CDs”) should not be used. We accept no liability for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. Starting CD mode . If there is no CD in the drive, . Press the button 9. The flip/release panel opens. . Gently insert the CD into the CD compartment with the printed side uppermost until you feel some resistance. The CD will be drawn into the drive. Do not hinder or assist the drive as it draws the CD in. . Close the panel using light pressure until you feel it latch into place. CD playback begins. . If there is already a CD in the drive, . press the SRC button @ repeatedly until “CD” appears on the display. Playback begins from the point at which it was last interrupted. Selecting a track . Press one of the buttons on the arrow block : to select the next or previous track. If the or button : is pressed once, the current track is played again from the beginning. Quick track selection To quickly select tracks backwards or forwards, . keep one of the buttons : pressed until fast reverse / forward track selection begins. Fast search (audible) For a fast search backwards or forwards . keep the buttons : pressed until the fast search backwards or forwards begins. ENGLISH 51 CD MODE Random play (MIX) . Press the button 5 MIX >. “MIX CD” appears briefly on the display, the MIX symbol lights up. The next track played will be randomly selected. Stopping MIX . Press the button 5 MIX > once again. “MIX OFF” appears briefly on the display, the MIX symbol goes out. Scanning tracks (SCAN) You can briefly listen in to all the tracks on a CD. . Hold down the OK button ; for more than two seconds. The next track starts to play. Note: The scanning time is adjustable. Read about setting the scanning time in the section “Setting the scanning time” in the chapter “Radio mode”. Stopping SCAN and continuing playback . Press the OK button ; to end scanning. The current track will then continue to play. Repeating a track (REPEAT) . If you would like to repeat a track, press button 4 RPT >. “REPEAT TRCK” appears briefly on the display, the RPT symbol lights up. The track is then repeated until RPT is deactivated. Stopping REPEAT . If you would like to end repeat, press the button 4 RPT > once again. “REPEAT OFF” appears briefly on the display, the RPT symbol goes out. Normal playback is resumed. Interrupting play (PAUSE) . Press the button 1 >. “PAUSE” appears on the display. Ending Pause . Press the button 1 > during the pause. Play then resumes. Changing the display . To alter the display between track number and time or track number and playing time or track number and CD name, press the DIS 7 button once or several times for more than two seconds until the desired elements appear on the display. Traffic announcements in CD mode . If you want to receive traffic announcements whilst listening to a CD, press the TRAF ? button. Traffic announcement priority is active when the traffic-jam symbol lights up on the display. Please see the chapter “Traffic information”. CD MODE Naming CDs To make it easier for you to recognise your CDs, the car radio offers an individual name option for 30 CDs. The names should have a maximum of eight digits. If you attempt to allocate more than 30 names, “FULL” will appear on the display. Entering/altering CD names . Listen to the desired CD. . Press the MENU button 8. . Use the buttons : to select “CD NAME”. . Press the or button : twice. You are...

Download now

Please, enter two numbers from picture: