Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
If your system is not performing as it should, call SDI Technologies Inc., Timex Audio Products Consumer Services, 1-800-888-4491 for assistance. Laser Safety This unit employs a laser. Only a qualified person should remove the cover or attempt to service this device, because of possible eye injury. CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED, AVOID DIRECT EXPOSURE TO BEAM. CAUTION: HAZARDOUS LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead in an equilateral triangle is intended to alert the user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The symbols above are located at the back of the cabinet. CAUTION: To prevent electric shock, match wide blade of plug to wide slot. Fully insert. ATTENTION: Pour eviter les choc electriques. Introduire la lame la plus large de la fiche dans la borne correspondante de la prises et pousser jusqu’au fond. Note: The manufacturer is not responsible for any radio or TV interference cause by unauthorized modifications to this equipment. Such modification could void the user’s authority to operate the equipment. Model T1251 Stereo CD Clock Radio with Auto-Set Digital Tuning SNOOZE/DIMMER 2 For additional information, online registration, and exclusive special offers visit our website: T1251-021307-A For questions or comments regarding this or other products, please call our toll-free number 1-800-888-4491. Para instruccionese en Espanol, llame al 1-800-888-4491. This unit includes three sets of 12 Preset Button Paper Inserts, each showing a different radio station format (Jazz, Country, Rock, etc.). Follow these instructions to insert the inserts to match the programmed stations. SNOOZE/DIMMER 2 Controls and Indicators M Zone Button Time Set Button O On/Off Lock Switch P 1 2 3 4 N Calendar Button Display with Indicators Q MP-3/AUX Line- In Button Top of cabinet R CD Play/Pause Button 5 General Operating Instructions Playing Compact Discs Playing the MP-3 / Aux Line-in Adjusting the Display Backlight 6 Playing the Radio S Open CD Door Button Daylight-Saving Time Indicator Clock PM Indicator Battery Low Indicator Unlock Indicator Alarm Off Indicator Zone/Calendar Display/ CD Track/Radio Dial/ Alarm Wake Time Alarm Wake Time Radio Band AM/PM Indicators AM/FM Indicators Buzzer Alarm Indicator CD/Radio Alarm Indicator CD Play Indicator Pause Indicator T1251 I/B_back Feb. 28, 07. Changing the Preset Button Inserts G Use a Phillips screwdriver to secure the top panel cover. F Replace the top panel with the tags against hooks from the front. TIP: Open the CD door to make replacing top easier. FRAME CLEAR BUTTON COVER WITH INSERT 1 CLEAR BUTTON COVER 2 2. Slide the P On/Off Lock switch to 'Off'. The unlock indicator will appear on the display. 3. Press the M Zone Button. The current Auto-Set Time Zone will flash. Press the 3 << Buttons and 9 >> Buttons to select your time zone. The display will show each zone's current time setting. There are seven zones Auto-Set Time Zones ATL : Atlantic Standard Time EAS: Eastern Standard Time CEN: Central Standard Time MTN: Mountain Standard Time PAC: Pacific Standard Time ALS: Alaska Standard Time HAI: Hawaii Standard Time 4. Press the J Enter Button. Manual Time and Date Settings 1. To change the time setting, press the O Time Set Button. The clock display will flash. Press the 3 << and 9 >> Buttons to set the time. Hold a button for a few seconds to set the time rapidly. Be sure to set the correct AM/PM time, shown by the PM indicator. 2. Press the J Enter Button. The clock will beep twice and the display will stop flashing. 3. Press the N Calendar Button. The current year setting will flash on lower right screen. Press 3 << and 9 >> Buttons to adjust. Press N Calendar Button again. The month/date will flash. Press 3 << and 9 >> Buttons to adjust then press the J Enter Button to exit. Daylight-Saving Time 1. Depending on your living area and if Daylight Saving Time (DST) is observed, you can manually switch DST on (+1), OFF or use the AUTO setting. 2. To manually turn on the DST function, just set the T DST Switch located on the bottom of the unit to +1. The DST icon will appear and the time will advance 1...