Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
The Radio Alarm Indicator will appear on the display, showing that the radio alarm has been set. Setting Alarm 2 for Nature Sounds/Buzzer 1. Press and hold the 7 Nature Sounds/Buzzer Alarm 2 Button until the Alarm 2 settings and Sounds Alarm Indicator appear on the display. 2. Press the 1 Reverse or 6 Forward Button to set the Alarm 2 time. 3. Use the L Mode/DST Button to select a nature sound or the buzzer to wake to. There is a choice of five sounds: Sound #1: Ocean Surf Sound #2: Birds Sound #3: Brook Sound #4: Wind Chimes buz: Buzzer 4. See Note #4 in the Setting Alarm 1 section for instructions on setting the 7-5-2 alarm setting for Alarm 2. 5. After you have programmed the Alarm 2 settings, press the 4 Enter Button or wait ten seconds to return to the clock display. The Sounds Alarm Indicator will appear on the display, showing that the alarm is set. 8 Operating the Dual Alarm System (Continued) Activating the Alarms 1. To activate the radio alarm, make sure that the Radio Alarm Indicator appears on the display. If it does not, press the 2 Radio Alarm 1 Button once so that it does. As long as the indicator appears, the alarm will sound at the set time and days. 2. To activate the nature sounds/buzzer alarm, make sure that the Sounds Alarm Indicator appears on the display. If it does not, press the 7 Nature Sounds/Buzzer Alarm 2 Button once so that it does. 3. When the alarm sounds, press the 3 Off/Reset Button to turn off the alarm while still maintaining the programmed 7-5-2 alarm settings. To turn off an alarm and cancel its 7-5-2 settings, press its Alarm Button so that its Alarm Indicator no longer appears on the display. 4. To activate the snooze feature, press the 5 Snooze/Dimmer Bar when the alarm sounds. The alarm will shut off for approximately ten minutes before sounding again. The feature can be repeated several times during the one-hour snooze cycle. 5. If it is not turned off, the alarm will sound for an hour before stopping. As long as an Alarm Indicator appears on the display, the alarm will sound at the set time, according to the 7-5-2 settings. Daylight-Saving Time (DST) and Leap Year Adjustments If you live in an area that does not observe Daylight-Saving Time, it will be necessary for you to manually set the Daylight- Saving Time (DST) function. • Press the N Power/Sleep Button to turn the unit OFF. • Press and hold the L Mode/DST Button for 5 seconds to turn “DST” on. The LCD display will indicate “DST”. • Press and hold the L Mode/DST Button for 5 seconds again to cancel the “DST” function and restore to standard time. Adjusting the Display Backlight • This alarm clock radio features an adjustable display backlight, with dim, medium, and bright settings. To select a backlight setting, press the 5 Snooze/Dimmer Bar until the desired brightness is reached. Please note that the backlight will not work while the clock is operating on battery power. 9 Listening and Sleeping to the Radio Operating the Radio 1. Press the N Power/Sleep Button once to turn on the radio. Note: If the N Power/Sleep Button is pressed more than once, the unit will enter the sleep mode, with the radio operating on a timer. See Sleeping to the Radio Using the Timer for more information about this feature. 2. Press the L Mode/DST Button to select the AM band or one of the two FM bands. The Radio Band Indicator will show which frequency is in use. 3. Press the 1 Reverse and 6 Forward Buttons to tune into a radio station. To scan the stations, hold a button for about three seconds. The radio will rapidly advance to the next strong signal. 4. You may also use the M Memory Set Buttons to select a preset radio station. See the Programming Radio Station Memories section for instructions on programming radio station settings. 5. Rotate the O Volume Thumbwheel to adjust the volume level. 6. Press the 3 Off/Reset Button to turn the power off. Programming Radio Station Settings This Alarm Clock Radio features a total of 18 programmable radio settings: 12 FM stations and six AM stations. These allow you to preset your favorite stations and access them quickly. 1. Press the N Power/Sleep Button once to turn on the radio. 2. Press the L Mode/DST Button to select a radio band. The AM/FM Radio Indicator will show which band is in use. 3. Press the 1 Reverse and 6 Forward Buttons to find a station to program into the memory. 4. When you have reached the station you wish to program, press and hold one of the six M Memory Set Buttons until you hear a beep. The radio station has now been programmed into that preset slot, and you can reach the station by pressing its M Memory Set Button while the radio is turned on. 5. Follow the above instructions to continue programming radio station settings into the memory. You can save a total of 18 stations using the three bands. 6. To edit a setting, enter a different radio station as an existing M Memory Set Button. This overrides the original setting. Antenna Information and Adjustment FM –...