To adjust the speaker volume, press the (UP) button to increase, or press the (DOWN) button to decrease. The LCD Screen will show the digital speaker volume level during adjustment. 3.3 Receiving a Call The unit is continuously in Receive mode when the unit is turned ON and not transmitting. When a signal is received on the current channel, the receive signal icon “RX” will be displayed on the LCD Screen. 3.4 Transmitting (sending) Press and hold the TALK (Push to Talk) button to transmit your v

LCD Screen USER GUIDE PWR/VOL Switch - Rotate clockwise/ counter clockwise to turn the unit ON or OFF, and adjust the volume. \_f Ear/Mic/Charge jack CALL button -Press to send Ringing tone to other PMR units. Transmit (LED) MENU Button -Press to switch between Modes. MIC (Microphone) Receiver (LED) Lights up when you are receiving signals 1 RX SCAN DCS BB mam [ng ¿g On «H* Channel Number. Changes from 1 to 8 as selected by the user. CTCSS Code. Changes from 1 to 38 as selecte

PWR(POWER) Button – Press CALL button and hold to turn -Press to send the unit ON or Ringing tone to OFF. other PMR units. MENU Button -Press to change To switch between Modes. UP/DOWN Buttons – MIC (Microphone) Press to change channels, volume, and to select Speaker settings during programming. 1. LCD Screen Channel Number. Changes from 1 to 8 as selected by the user. CTCSS Code. Changes from 1 to 38 as selected by the user. Displays the Battery change level. When the bars are reduced, the batt