Login:
Sorted: Name ↑   Downloads   Rate   Size ↓  
downloaded: 0   File size: 2 kb   Manafacture: Bissell  
Category: Vacuum Cleaners

downloaded: 3   File size: 2 kb   Manafacture: Bissell  
Category: Vacuum Cleaners

downloaded: 8   File size: 2 kb   Manafacture: Bissell  
Category: Vacuum Cleaners

downloaded: 0   File size: 83 kb   Manafacture: Bissell  
Category: Vacuum Cleaners
@name

APPLICATIONS FOR FLOOR MACHINE (MODELS P201, P171, P201HD, P171HD and P131) 175 RPM ONLY The Powr-Flite® 175 RPM floor machine will operate in a wide variety of applications. The 175 RPM floor machine is the most versatile speed in the floor care industry. APPLICATIONS OF 175 RPM STANDARD SPEED FLOOR MACHINES ON HARD FLOORS •Spray buffing with a Powr-HD™ red spray buff pad and spray buff chemical, such as Powr-Glo®. •Dry buffing a buffable finish with a Powr-HD™ tan, beige or white pad or Powr-L

downloaded: 7   File size: 86 kb   Manafacture: Bissell  
Category: Vacuum Cleaners
@name

. When this happens the red Water Level Indicator will rise and create a shut off mechanism over the hole where red Lint Filter Basket sits to prevent water getting into motor area. If this occurs, remove the 2-in1 Tank from the machine. Lift grey latch at back of tank to remove Tank Lid Ensure that the red Water Indicator inside the Tank Lid is sitting away from the red Lint Filter Basket inside and remove any debris from the red lint filter basket (it can be removed and rinsed in hot tap water

downloaded: 2   File size: 87 kb   Manafacture: Bissell  
Category: Vacuum Cleaners
@name

For BISSELL full size machines with Formula / SmartMix® Tank: add 1 cup (8 oz.) of hot tap water to the formula tank and then add formula to the fill line. b. For other full size machines and rental machines: add 1 % capfuls (2.5 oz total) to each gallon of hot tap water. Need help? Contact us at: or Call 1-800-237-7691 Mon-Fri: 8am to 10pm ET Sat: 9am to 8pm ET

downloaded: 17   File size: 248 kb   Manafacture: Bissell  
Category: Vacuum Cleaners
@name

4. Repeat motion over same area without depressing Trigger. 5. Repeat Steps 3 and 4 until no more dirt can be removed. 6. Continue to clean entire carpet, working in 3’ x 4’ sections. 7. Empty the Dirty Water Tank Assembly when dirty water reaches the fill line. 8. If the machine loses suction and/or motor noise rises in pitch, turn Power Switch to OFF. Check the Dirty Water Tank Assembly and empty the tank if it is full [see WHEN YOU’RE DONE, page 6]. 9. If floor nozzle stops spraying, turn Pow

downloaded: 0   File size: 248 kb   Manafacture: Bissell  
Category: Vacuum Cleaners
@name

Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the drawing above. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be us

downloaded: 2   File size: 263 kb   Manafacture: Bissell  
Category: Vacuum Cleaners
@name

2. Continue to clean soiled area, working in small sections, until no more dirt can be removed. Do not overwet. 3. If the machine loses suction and/or motor noise rises in pitch, turn Power Switch to OFF. Check the Dirty Water Tank Assembly and empty the tank if it is full [see WHEN YOU’RE DONE, page 7]. 4. If spray tip stops spraying, turn Power Switch to OFF and check water and cleaning solution levels. Refill if needed. Never run POWERSTEAMERTM dry. Cleaning Safety Instructions, page 2. If cl

downloaded: 13   File size: 263 kb   Manafacture: Bissell  
Category: Vacuum Cleaners
@name

. . . . . . . . . . .8-9 Cleaning bare floors . . . . .10-11 Putting it away . . . . . . . . . . . .11 Troubleshooting . . . . . . . . . . .12 Parts . . . . . . . . . . . . . . . . . . .13 Warranty . . . . . . . . . . . . . . . .14 Consumer services . . . . . . . . .14 1. Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your POWERSTEAMER.T M If tag is coded with an “X” or “S” (with diagonal strike-through), or says “Dry Clean Only,” do not proceed. Do not use on





Category