Do not use for industrial purposes. To reduce the risk of electric shock, do not use
/ Регулятор мощности 5. Carrying handle S. Ручка для переноски 6. Air inlet 6. Всасывающее отверстие У. Cord rewind button у. Кнопка сматывания электрошнура s. Wheel s. Колесо CZ POPIS BG ОПИСАНИЕ i. Otevlracl tlacltko prostoru na prachovy sacek i. Бутон за отваряне на отделението за торбичка 2. Prostor na prachovy sacek 2. Отделение за торбичка З. Ukazatel naplnenl prachoveho sacku З. Индикатор на запълване на торбичка 4. Tlacltko Start/Stop / Regulator vykonu 4. Бутон Вкл./Изкл. / Ре
Do not use with inlet blocked. Keep free of dust, hair and anything that may reduce airflow. • Be careful, when cleaning on stairs. • Before you start using the vacuum cleaner, please remove all burning, large or sharp objects from the floor in order to prevent the damage of the filter. CAUTION • To avoid voltage overload do not plug the unit and other powerful electrical appliances to the power supply at the same time. • Never use the vacuum cleaner without the filters. • Do not use the
SCARLETT SC-1084 GB VACUUM CLEANER...............................................................................3 RUS ПЫЛЕСОС БЫТОВОЙ.......................................................................з CZ PODLAHOVY VYSAVAC.....................................................................5 BG П РАХОСМУКАЧ KA.................................................................................6 PL ODKURZACZ DOMOWY.....................................................................7 RO
This unit does not absorb the water. • If you have cleaned the carpet with liquid detergent, let the carpet dry up completely before vacuuming it. • Never use the appliance without dust bag. Replace the dust bag without delay if it is damaged. VACUUM CLEANER ASSEMBLING • Insert the flexible hose into the air inlet and press until it clicks into proper position. • To remove the hose, press the button on hose base, then pull to remove it from the attachment point. • Assemble 2 pieces tube.
The yellow mark on the cord shows optimal cord length. Do not unwind the cord beyond the red mark. • Press On/Off button to switch the unit on and press again to stop it. • You can adjust the air flow using the air flow regulator on the flexible hose handle: - Decrease flow for cleaning curtains, books, furniture, etc. - Increase flow for cleaning bare floor. • To rewind the cord, press the rewind button and guide the cord with hand to ensure that it does not whip causing damage. • To prev
Replace the dust bag without delay if it is damaged. VACUUM CLEANER ASSEMBLING • Insert the flexible hose into the air inlet and press until it clicks into proper position. • Extend the telescopic tube to the desired length. • Insert a hose into tube. • Attach a nozzle to the tube: - Floor brush is intended for cleaning bare floor and floor coverings. - Crevice/Furniture nozzle is for cleaning sofa, curtain or dust on the decorative surfaces, corners and between cushions. To clean furnitu
The yellow mark on the cord shows optimal cord length. Do not unwind the cord beyond the red mark. • Press On/Off button to switch the unit on and press again to stop it. • You can adjust the air flow using the air flow regulator on the flexible hose handle: - Decrease flow for cleaning curtains, books, furniture, etc. - Increase flow for cleaning bare floor. • You can adjust the vacuum cleaner power using the power control on body. • To rewind the cord, press the rewind button and guide t
Replace the dust bag without delay if it is damaged. VACUUM CLEANER ASSEMBLING • Insert the flexible hose into the air inlet and press until it clicks into proper position. • To remove the hose, press the button on hose base, then pull to remove it from the attachment point. • Extend the telescopic tube to the desired length. • Insert a hose into tube. • Attach a nozzle to the tube: - Floor brush is intended for cleaning bare floor and floor coverings. - Crevice nozzle is for cleaning co
To clean furniture and decorative surfaces turn the nozzle in the arrow shown direction. INSTRUCTION FOR USE • Before starting, unwind the cord to sufficient length and insert the plug into the power supply. The yellow mark on the cord shows optimal cord length. Do not unwind the cord beyond the red mark. • Press On/Off button to switch the unit on and press again to stop it. • You can adjust the air flow using the air flow regulator on the flexible hose handle: - Decrease flow for cleaning