Votes - , Average rating: ( )

User manual Bissell, model Standard And High Speed Floor Machine P201

Manafacture: Bissell
File size: 83.49 kb
File name: 841bf8be-99f2-48f3-8f70-ed13c825f5d5.pdf

Language of manual:

The document is loading, please wait

Download nowClose

The document is loading, please wait

Download nowClose

APPLICATIONS FOR FLOOR MACHINE (MODELS P201, P171, P201HD, P171HD and P131) 175 RPM ONLY The Powr-Flite® 175 RPM floor machine will operate in a wide variety of applications. The 175 RPM floor machine is the most versatile speed in the floor care industry. APPLICATIONS OF 175 RPM STANDARD SPEED FLOOR MACHINES ON HARD FLOORS •Spray buffing with a Powr-HD™ red spray buff pad and spray buff chemical, such as Powr-Glo®. •Dry buffing a buffable finish with a Powr-HD™ tan, beige or white pad or Powr-Luster™ brush. •Scrubbing with a Powr-HD™ green or blue pad or scrubbing brush, such as Powr-Scuff™. •Stripping with a Powr-HD™ black pad and a stripping chemical, such as Powr-Up®. APPLICATIONS OF 175 RPM STANDARD SPEED FLOOR MACHINES ON CARPET •Bonnet cleaning with a Powr-Sorb™ yarn bonnet and carpet maintainer chemical, such as Spin-Away®. •Shampooing using a showerfeed shampoo brush and solution tank mounted to the hand containing carpet shampoo. APPLICATION OF POWR-FLITE® HEAVY DUTY 175 RPM FLOOR MACHINES (MODELS P201HD and P171HD) The heavy duty standard speed floor machine may be used for spray buffing, dry buffing, scrubbing and stripping applications. These heavy duty floor machines are specially recommended for long term aggressive scrubbing and stripping maintenance. The P201HD & P171HD heavy duty floor machines are specially recommended for the following applications: •Scraping with an attachment such as the Powr-Flite® Scrape- Away® tool to remove heavy industrial deposits and residue or to prepare a foundation for installation of carpet. •Wire brushing of concrete floors. •Sanding with very aggressive sandpaper or sand screen discs. •Carpet restoration where shampooing & pile lifting require very stiff brush bristles. WARNING To prevent injury, always remove the electrical plug from the electrical outlet before changing the polishing pad and before leaving the machine. PREPARE THE MACHINE FOR OPERATION To attach the drive block or brush or other attachment, be sure the handle is “locked” in the upright position (See picture #1). Lay the floor machine on its back with the handle lying on the floor, this exposes the driving plate on the underside of the floor machine. Holding the drive block, brush or attachment in both hands and straddling the motor with your back to the handlebox, bend over and fit the three slots of the clutch plate (build into the back of the brush) over the three lugs of the driving plate. Turn the drive block, brush or attachment counter-clockwise as far as it will go until it is seated in the ready-to-use position. (See picture #2) CAUTION: This is the only proper way to install a drive block, brush or attachment. NEVER put a drive block, brush or attachment on the machine by placing it on the floor and moving the running machine over it, or by placing the machine over the block or attachment and then starting the motor. Return the floor machine to upright position and adjust handle to operating position. Recommended handle position is close to the waist with arms extended down. Lock the cam release lever into position. NOTE: The hardened steel cam release lever does not require extreme tightening to effectively hold the handle in position. Over-tightening will shorten the functional life of the lever. To remove drive block, brush or attachment: Lay the floor machine on it’s back again and disengage clutch plate slots from driving plate lugs by turning clockwise. HOW ...