Votes - 0, Average rating: 0
(
)
)
|
manual abstract
1) ENGLISH6 A Bendable crevice tool (FC6092/6090) B Floor nozzle (FC6094 only) C Cleaning brush D Crevice tool E Brush tool F Socket for car cord (FC6092 only) G Contact points H Connection for telescopic stick (FC6094 only) I Charging light with batter y-low indication J Exhaust air openings K On/off slide L Dust compar tment release button M Motor inlet grille N Filter holder O Inner filter P Outer filter Q Dust compar tment R Nozzle release button S Nozzle inser t T Detachable nozzle U Nozzle & stick holder (FC6094 only) V Wall mounting bracket W Charging base X Adapter Y Car cord with car plug (FC6092 only) Z Telescopic stick (FC6094 only) Important Read these instructions for use carefully before using the appliance and save them for future reference. . Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance. . Do not use the appliance if it is damaged in any way.Take it to an authorised Philips service centre for repair. ENGLISH . If the adapter or charging base is damaged, always have it replaced by one of the original type to avoid a hazard. . FC6092 only: if the car cord or car plug is damaged, stop using the car cord and have it replaced by one of the original type. . Never suck up water or any other liquid. Never suck up ashes until they are cold. . Never immerse the vacuum cleaner, the adapter or the charging base in water. . Remove the adapter from the wall socket before cleaning the charging base. . Only charge the vacuum cleaner with the adapter and charging base supplied. During charging, the adapter will feel warm to the touch.This is normal. . Always switch the vacuum cleaner off after use. . Keep the appliance out of the reach of children. . The voltage on the contact points in the charging base is low (max. 30 volts) and therefore not dangerous. . Never block the exhaust air openings during vacuuming. . Switch the appliance off when recharging it. . To avoid the risk of electric shock, be careful when drilling holes in the wall to attach the wall mounting bracket, especially close to a wall socket. . Always use the appliance with the filter unit. . Always use the appliance with the nozzle insert in place. Preparing for use Attaching the charging base to the wall 1 Screw the wall mounting bracket to the wall with the screws supplied with the appliance (fig. 2). 2 Attach the charging base to the wall mounting bracket (fig. 3). 3 Attach the nozzle & stick holder to the wall mounting bracket (FC6094 only). 4 Screw the nozzle & stick holder to the wall with the screws supplied with the appliance. ENGLISH 5 You can also place the charging base on a level and horizontal surface (fig. 4). 6 Slide the brush tool onto the crevice tool and place them in the charging base (fig. 5). 7 FC6094 only: insert the telescopic stick and the floor nozzle into the nozzle & stick holder ('click') (fig. 6). Charging the appliance Charge the appliance for at least 18 hours before you use it for the first time. When the charging light star ts blinking during operation, the batter y pack is running low and needs to be recharged. 1 Insert the small plug into the charging base and insert the adapter into the wall socket (fig. 7). . The charging light will go on to indicate that the appliance is charging (fig. 8). B The charging light will stay on as long as the appliance is placed on the charging base and the adapter is in the wall socket. B The charging light does not give any information about the charge level of the built-in batter y pack. Using the appliance 1 Push the on/off slide forwards to switch the appliance on (fig. 9). 2 Push the on/off slide backwards to switch the appliance off (fig. 10). 3 Leave the adapter in the wall socket and always put the vacuum cleaner back onto the charging base after use, even if the battery pack is still almost fully charged. ENGLISH Accessories Tools This appliance comes with the following tools: 1 brush tool for cleaning delicate surfaces 2 crevice tool for cleaning hard-to-reach places 3 bendable crevice tool for cleaning at an angle (FC6092/6090 only) 1 Take the tool you want to use. 2 Attach the tool to the detachable nozzle (fig. 11). Car cord (FC6092 only) With the car cord you can connect the vacuum cleaner to the cigarette lighter socket in your car and use it as long as necessar y without having to recharge it. 1 Insert the small plug of the car cord in the socket of the appliance and insert the car plug in the cigarette lighter socket of your car (fig. 12). The car cord cannot be used to charge the appliance. 2 Detach the car cord from the appliance by pressing the button on the small plug. To prevent damage, do not pull the small plug out of the appliance without pressing the button. Extra reach (FC6094 only) 1 Attach the telescopic stick by pushing it firmly into the back of the appliance until it locks into position ('click') (fig. 13). The telescopic stick gives you extra reach when cleaning hard f...