Votes - 0, Average rating: 0
(
)
)
|
manual abstract
As a result you can experience electric shocks when you touch the tube or other steel par ts of your vacuum cleaner.These shocks are not harmful to you and do not damage the appliance. To reduce this inconvenience we advise you: 1 to discharge the appliance by frequently holding the tube against other metal objects in the room (for example the legs of a table or chair, a radiator etc.) (Fig. 2) 2 to raise the air humidity level in the room by placing water in the room. For example, you can hang containers filled with water from your radiators or place bowls filled with water on or near your radiators (Fig. 3). Electromagnetic fields (EmF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. preparing for use hose 1 To connect the hose, push it into the appliance (1) and turn it clockwise (2) (Fig. 4). Note:To disconnect the hose, turn it anticlockwise and pull it out of the appliance. telescopic tube with extension tube 1 To connect the extension tube to the bottom part of the telescopic tube, insert the narrow section into wider section and turn a little. Note:To disconnect the tube parts from each other, pull and turn a little. 2 To connect the tube to the handgrip of the hose, insert the narrow section into the wider section and turn a little (Fig. 5). Note:To disconnect the tube from the handgrip, pull and turn a little. 3 To adjust the length of the tube to the length you find most comfortable during vacuuming, push the slide on the tube upwards (1) and push the upper tube part downwards or pull it upwards (2) (Fig. 6). nozzles 1 Connecting a nozzle to the tube To connect a nozzle to the tube, insert the tube into the nozzle and turn a little (Fig. 7). 8 English Note:To disconnect a nozzle from the tube, pull and turn a little. Combination nozzle with 2 rocker switches You can use the combination nozzle on carpet (with the brush strips folded in) or on hard floors (with the brush strips folded out). -To clean hard floors, push the rocker switch on top of the combination nozzle with your foot to make the brush strips come out of the nozzle housing (Fig. 8). -To clean carpet, push the rocker switch on the other side to make the brush strips disappear into the housing (Fig. 9). small nozzle, crevice nozzle and brush nozzle 1 Connect the small nozzle, crevice nozzle or brush nozzle directly to the handgrip or to the tube (Fig. 10). 1 Crevice nozzle: use this nozzle to clean narrow corners or hard-to-reach places. 2 Small nozzle: use this nozzle to clean small areas, e.g. the seats of chairs and sofas. 3 Brush nozzle: use this nozzle to clean computers, bookshelves etc. using the appliance vacuum cleaning -You can carr y the vacuum cleaner by the handle at the front or on top of the appliance (Fig. 11). 1 2 Pull the mains cord out of the appliance and put the mains plug in the wall socket. Press the on/off button on top of the appliance with your foot to switch on the appliance (Fig. 12). -If you want to pause for a moment, inser t the ridge on the nozzle into the parking slot to park the tube in a convenient position (Fig. 13). Note:To ensure stable parking of the telescopic tube, adjust the tube to the shortest length. 3 To switch off the appliance, press the on/off button again. adjusting suction power -You can adjust the suction power with the electronic suction power control on the vacuum cleaner (Fig. 14). Cleaning Always switch off and unplug the appliance before you remove and clean any parts. Do not clean any part of the vacuum cleaner in the dishwasher. If necessary, clean the parts with a moist cloth. Clean the appliance with a damp cloth. Dust container and filter cylinder For optimal performance, always empty the dust container after use and clean the filter cylinder regularly. Disconnect the hose from the appliance. Pull at the cover release tab (1) and open the cover (2) (Fig. 15). Remove the dust container from the appliance (Fig. 16). Remove the lid of the dust container (Fig. 17). 1 2 3 4 English To remove the filter cylinder case, turn it anticlockwise (1) and lift it out of the dust container (2) (Fig. 18). Remove the filter cylinder from the dust container (Fig. 19). To clean the filter cylinder, tap it against the side of a dustbin (Fig. 20). Empty the dust container into a dustbin (Fig. 21). Put the filter cylinder back into the dust container (Fig. 22). 5 6 7 8 9 10 Put the filter cylinder case back onto the filter cylinder (1) and turn it clockwise to fix it (2) (Fig. 23). 11 Reattach the lid of the dust container (1) and close it (‘click’) (2) (Fig. 24). 12 Put the dust container back into the appliance (Fig. 25). 13 Close the cover (‘click’) (Fig. 26). replacing the Clean air hEpa outlet filter Your vacuum cleaner is equipped with a Clean Air HEPA outlet filter (ser vice code 4222 459 48841). Rep...