Login:
Votes - 0, Average rating: 0 ( )

User manual Philips, model FC9122/20

Manafacture: Philips
File size: 489.76 kb
File name:
Language of manual:svitentresfrdenlptdafi
Free link for this manual available at the bottom of the page



manual abstract


By pushing the - button, you will reduce the suction power by one setting (fig. 20). 2 3 4 5 By pushing the + button, you will increase the suction power by one setting (fig. 21). Push the standby button to temporarily switch the vacuum cleaner off, for instance when you have to move some furniture (fig. 22). To continue vacuum cleaning, simply press the - button or the + button.The appliance will start operating at the previously selected suction power setting again. Parking the tube 1 By inserting the ridge on the nozzle into the parking slot, you can park the tube in a convenient position (fig. 23). ENGLISH Storage 1 2 You can put the appliance in upright position and attach the nozzle to the appliance by inserting the ridge on the nozzle into the slot (fig. 24). Always put the Tri-Active nozzle in carpet setting when you store it and prevent the side brushes from becoming bent. Replacement The dustbag 1 Replace the dustbag as soon as the dustbag-full indicator changes colour (fig. 25). The dustbag is full when the colour of the indicator has changed when the nozzle is not placed on the floor. 2 3 Switch the appliance off. Open the cover by pulling it upwards (fig. 26). Place your fingers at the front of the cover and press with your thumb on the ridge on top of the cover. 4 Lift the dustbag holder out of the appliance (fig. 27). Make sure you hold the dustbag upright when lifting it out of the appliance. 5 Remove the full dustbag from the holder by pulling the cardboard tag (fig. 28). When you do this, the dustbag will be automatically sealed. 6 Slide the cardboard of the new dustbag into the two grooves of the dustbag holder as far as possible. Re-insert the dustbag holder into the vacuum cleaner (fig. 29). You cannot close the cover if no dustbag has been inserted. The mains cord If the mains cord of the appliance is damaged, it must always be replaced by Philips or a ser vice centre authorised by Philips, as special tools and/or par ts are required. Cleaning and maintenance of filters Motor Protection Filter Remove the dustbag holder with the dustbag (fig. 27). Take the Motor Protection Filter holder out of the appliance and clean the filter by shaking it over a dustbin (fig. 30). Press the filter holder with the clean filter firmly into place to ensure that it fits properly at the bottom (fig. 31). Place the dustbag holder with the dustbag back into the appliance. Activated Carbon Filter (specific types only) Ever y time you empty or replace the dustbag, clean the Permanent Motor Protection Filter. 1 2 3 4 Instead of with the Motor Protection Filter, some appliances are equipped with an Activated Carbon Filter. This filter neutralises smells produced by dir t in the dustbag. Replace the Activated Carbon Filter every 6 months or when you notice that smell absorption becomes less effective. 10 ENGLISH To replace the Activated Carbon Filter, see the Motor Protection Filter section, above. 2 Instead of cleaning the filter, you have to insert ...

Other models in this manual:
Vacuum Cleaners - FC9120/20 (489.76 kb)
Vacuum Cleaners - FC9132/01 (489.76 kb)
Vacuum Cleaners - FC9128/01 (489.76 kb)
Vacuum Cleaners - FC9124/20 (489.76 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category