|
Other manuals for this model:
manual abstract
Serious injury may result. 1. Do not use to suck up water. 2. Do not immerse in water for cleaning. 3. The hose should be checked regularly and must not be used if damaged. WARNING 1 2 IDENTIFICATIONS OF PARTS Features marked * may vary according to model. HANDLE AIR REGULATOR FLOOR NOZZLE* RUG/FLOOR SELECTOR CLAMPER FOR DUST BAG COMPARTMENT POWER CONTROL SWITCH* & ON/OFF SWITCH DUST-FULL INDICATOR SUCTION HOSE BUTTON FOR SUCTION HOSE REMOVAL CARRYING HANDLE& CORD REWIND BUTTON TUBE* A TYPE B TYPE *BELT-STRAP ASSY CREVICE-TOOL HANGER ACCESSORY DUSTING BRUSH ASSEMBLING THE VACUUM-CLEANER READY FOR USE 1) Connect the suction hose to the suction tube. 2) Connect the suction tubes together (depending on model). 3) Connect the nozzle to the suction tube. 4) Grip the body connector with one hand and squeeze the tube in an inward direction. OPTION : EXTENDING : Holding the narrow part of the telescopic tube with one hand, pull the handle in the opposite direction with your other hand. . SHORTENING : Holding the narrow part of the telescopic tube with one hand, push the handle towards it using the other hand. -A djustable telescopic tube not available with all models. POWER CORD 1) PULLING OUT The power cord is long enough to be drawn out for convenience. 2) REWINDING When you have finished cleaning, disconnect the plug from the electrical outlet and simply press the cord rewind button lightly with your toe. NOTE : When removing the power cord from the electrical outlet, grasp the plug, not the cord. NOTE : For your convenience, the handle has two functions. It can be used as a “handle” to carry the unit. It is also the cord rewind button that can be used to rewind the power cord. 3 4 NOTE : ON/OFF switch is combined with POWER CONTROLLER - To start or stop the unit just lightly press it downward. ON/OFF SWITCH With the cord plugged into an electrical outlet, start or stop the vacuum cleaner by pushing lightly downward on the switch. NOTE : If the “Dust-Full” indicator continues to display “RED” even after changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged. DUST-FULL INDICATOR If the “Dust-Full” indicator changes to “RED” while you are cleaning, the dust bag requires replacement. POWER CONTROL(VARIABLE CONTROL TYPE ONLY) MIN MAX MIN MAX The vacuuming power can be adjusted to suit any situation with the electrical power control. MIN = For delicate fabrics, e.g.net curtains. MAX = For hard floors and heavily soiled carpets. -To adjust power output just turn it right or left. USING THE ACCESSORIES CREVICE DUSTING Crevice tool for radiators, crevices, corners, between cushions. Dusting brush for furniture, shelves, books, etc. • Before use, assemble the dusting brush to the crevice tool TOOL STORAGE Your cleaner features a tool storage device. Assemble the accessory hanger on to the extension tube. It can be used to store the cleaning tools while they are not in use. This tool can be separated into two parts. ...
Other models in this manual:Vacuum Cleaners - VC-5913 (527.67 kb)
Vacuum Cleaners - VC-5914 (527.67 kb)
Vacuum Cleaners - VC-5914V (527.67 kb)
Vacuum Cleaners - VC-5915V (527.67 kb)