Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
13. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. 14. Don’t carry the vacuum cleaner by holding the hose. Use the handle on the vacuum cleaner set. 15. Unplug the cleaner when not in use. Turn off the power switch before unplugging. contents as embling the clean er 05 05 Assembling the Cleaner operating the clean er 06 06 Power cord 06 On/Off switch 06 Power control maintain to ls an d filter 08 08 Using accessory 09 Maintain floor tools 10 Emptying the dust bin 11 Cleaning the dust pack 13 Cleaning the outlet filter 14 Change the battery (optional) trou bleshooting 15 01 ASSEMBLING assembling the cleaner _5 assembling the cleaner OPTION • Please do not push the button of dust bin handle when carrying machine. • For storage, park the floor nozzle. 6_ operating the cleaner operating the cleaner POWER CORD • When removing the plug from the electrical outlet, grasp the plug, not the cord. CAUTION on /of switch power control REMOTE-CONTROL TYPE (INFRARED CONTROL) (OPTIONAL) - HOSE sender 1. Vacuum cleaner ON/OFF ( ) Press the ON/OFF button to operate the vacuum cleaner. Press again to stop the vacuum cleaner. 2. Vacuum cleaner (+, -) Press the (+) button to operate the vacuum to high suction power. Press the (-) button to operate the vacuum to low suction power. Handle Control The cleaner is controlled by using infrared signals. Don’t cover the handle sender when you use a handle control button. 02 OPERA TING THE operating the cleaner _7 - BODY Press the power ON/OFF button repeatedly to start and to stop the vacuum cleaner. (OFF > ON > OFF) If the remote handle control is not working, the cleaner can be operated using the ON/OFF button on the body of the machine. 1 3 2 1 The ON/OFF button operates the vacuum cleanner or stops it. 2 The INFRARED light indicates the part that receives the infra-red signal from the handle control. 3 The filter light is illuminated when the dust pack requires checking or emptying. An audio signal will also sound. BODY-CONTROL TYPE (OPTIONAL) - HOSE To reduce suction for leaning draperies, small rugs, and other light fabrics, pull the tap air until the hole is open. - BODY (VOLUME TYPE ONLY) To control power level, just slide the power control bottom right and left. MIN = For delicate fabrics, e.g.net curtains. MAX = For hard floors and heavily soiled carpets. 8_ maintain tools and filter maintain tools and filter using acesory PIPE • Adjust the length of the telescopic pipe by sliding the length control button located in the center of the telescopic pipe back and forth. • To check for blockages, separate the telescopic pipe and adjust to shorten. This allows for easier removal of waste clogging the tube. ACCESSORY (OPTIONAL) • Push the accessory on to the end of the hose handle. • Pull out and turn the dusting brush for cleaning delicate areas. • To use the upholstery tool, push the accessory on to the end of the hose handle in the opposite direction. 03 MAINT AIN TOOLS TER maintain tools and filter _9 MAINTAIN FLOOR TOOLS 2-STEP BRUSH (OPTION) Carpet Cleaning Floor Cleaning • Adjust the inlet lever according to the floor surface. • Remove waste matter completely if the inlet is blocked. POWER PET PLUS BRUSH (OPTION) 1 2 3 4 6 5 For improved pickup of pet hair and fibre on carpets. Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled around the drum. In this case, clean the drum with care. 1. Push the Open button of the transparent screen cover to separate the cover. 2. Remove the brushbar from the transparent screen. 3. Remove waste matter such as dust and hair tangled around the brushbar using scissors. 4. Remove dust inside the brush housing using a dry duster or crevice tool. 5. Insert brushbar into rotating belt and assemble. 6. Click the transparent screen cover back into place to reassemble. PARQUET MASTER BRUSH (OPTION) • Vacuum dust in wide area at once. • Remove waste matter completely if the inlet is blocked. maintain tools and filter _9 maintain tools and filter emptying the dust bin 1 2 3 Once dust reaches the dust full mark, empty the dust bin. Take the dust bin out by pushing the button. Separate the dust bin cover. 4 5 6 Before use, push the dust bin into the main body of the vacuum cleaner until you hear the “click” sound. Throw the dust away in the bin. Close the dust bin cover. - Empty into a plastic bag. (recommended for asthma/allergy sufferers) You may rinse the dust bin with cold water. CLEANING THE DUST PACK WHEN TO CLEAN THE DUST PACK • The lamp will turn red when suction is reduced. If the light comes on, please clean the dust pack. ON(MAX) .. OFF • Turn the vacuum power to ‘MAX’. Handle Control Body Control • If the filter check indicator turns red with the inlet floating 10cm above flat floor, clean the dust pack. When suction is noticeably reduced continuously, please cleaning the dust pack. maintain ...
Other models in this manual:Vacuum Cleaners - SC8835 (15.06 mb)